1. Removed rubber pad that was secured by four screws. (Flat head screwdriver)
2. Removed base by gently pulling the base and the sander apart. Had to wiggle a bit to release the shocks from the base plate slots.
3. Modified replacement base sent by ereplacment (had to cut two plastic tabs, that were not suppose to be on the b
... Read morease for the model of my sander. The part fit perfect otherwise. Filed flat.)
4. Lined the four white shocks with their respective slots in the base. Paying close attention to keep the clamp with \"1\" at the front of the sander. I could not attach the base without the modification. I pressed the base and the body together.
5. Reattached the rubber pad with the original screws.
6. Tightened all screws on the body of the sander to reduce noise and unnecessary vibration. (Flathead screw driver)
7. Works perfectly
Read less
Did you find this story helpful?
Thank you for voting!
Would not hold the paper in place. Pad was worn and sticky
repair was easy but new part had a piece that was not on my worn part so I had to modify new part by removing two tab like pieces that did not match mine. Once removed (easily) part fit perfect and sander works great with no issues holding 320 grit sandpaper.
Did you find this story helpful?
Thank you for voting!
forward clamp that secures the sandpaper had worn away because its all plastic and is a molded part of the base
remove the 4 screws that hold the rubber pad and the base. pull base from unit , note: this can be a tight fit,but it will separate. Push new base on and replace the rubber pad.IF your pad has holes on it make sure you line the holes with the vent channels on the base then screw the 4 screws back on.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2609100684 Bosch Tool BASE")
_WW_1.gif "Part Location Diagram of 2609100684 Bosch Tool BASE")
