Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
the new lifting rod was an exact fit.
Installed new lifting rod into my jig saw and it works fine. great service , thanks.
Guest - September 18, 2019
Verified Purchase
★★★★★
★★★★★
Easier repair
Very expensive. For the cost of the replacement part you could buy a new hand held jig saw, but I like to fix things and not throw useful equipment away when they can be repaired to reduce global warming.
David - March 15, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed base held by two hex head screws
2. Pulled end cap from front end of saw
3. Removed recessed phillips head screws which hold two halves of saw body together.
4. Lay saw on side and lift half of saw body off to expose lifting rod
5. Remove lifting rod and replace with new rod. used excess grease in saw to
... Read more lube new rod
6. Replace components which were removed for repair
7. Plug saw in and test run.
8. Saw runs perfectly.
1. Remove base plate held by Hex Socket Head Cap Screw
2. Remove decorative cover held by two TORX head screws
3. Lay saw on side and remove recessed TORX head screws which hold two halves of saw housing together.
4. Lift half of saw housing off to expose lifting rod
5. Before removing the old lifting rod, take not
... Read moree of how everything is positioned, especially the washers where the lifting rod exits the housing and the coiled spring that holds the lifting rod into place. NOTE: I suggest taking a picture of it now with your cell phone camera.
5. Remove broken lifting rod and replace with new rod. The bearing block that was on the broken lifting rod is used when installing the new lifting rod.
6. Reassemble the saw in reverse order of steps 1-4 above.
NOTE: Pay attention to the caution in the owners manual about not turning the release lever on the lifting rod without have the saw blade in place or you may be ordering another lifting rod or throwing the saw away.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 2600780173 Bosch Tool LIFTING ROD")
_WW_1.gif "Part Location Diagram of 2600780173 Bosch Tool LIFTING ROD")
