Part Location Diagram of 1619X07588 Bosch Tool BATTERY CHARGER
See part 653 in the diagram
( Grid squares measure 1x1 inch )

BATTERY CHARGER 1619X07588

Manufactured by:
Bosch Tool
ERP Number:
ERP19507663
Part Number:
1619X07588
Original Equipment Manufacturer ?
Special Order

Easy 

Less than 15 mins 

(13 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine Manufacturer Sourced replacement part used on Skil Cordless Power Drills. This item is sold individually. Please note that a weak or defective battery can damage the charger. Weak batteries are batteries with bad cells. These type of batteries will not hold a charge. It will send a message to the charger to keep charging. This will eventually cause the charger to overheat and potentially smoke.

Troubleshooting

This part works with the following brands:
  • Skil
  • Bosch
This part works with the following products:
  • Cordless Drill
Part# 1619X07588 replaces these:
1619X07588,

Customer Part Reviews

?
4.5
Average Rating (out of 5):
★★★★★
★★★★★
(11 Reviews)
Click to filter by ratings:
  • 5 stars
    8
  • 4 stars
    2
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(13 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The charger for my 14.4v battery stopped sending power to charge the battery.

Ralph from Lester, West Virginia

21 of 21 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Since skil no longer makes the battery charger originally issued with my skil drill I had to replace it with a newer style of charger. The original being obsolete and no longer available.
The original had an AC output of 16.5v @0.38amps.
The new one has an AC output of 7.2v-18v @0.4amps.
The original charged the battery in a shorter amount of time. (about 2 hrs)
The new one took much longer. (about 8-12 hrs)
Perhaps the battery is not as good as it once was,contributing to the longer amount of charging time necessary.
Never-the-less,i am satisfied with my purchase and my drill and original battery are still working using the new charger.
Thank you ereplacementparts.com
Did you find this story helpful?
Thank you for voting!

Misplaced original charger.

Charles from Hot Springs, Arkansas

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Misplaced original charger in a move and needed a replacement. battery charger for a Skil 144bat, 14.4 volt battery which fits my Skil 2568 variable speed cordless drill. Since the original charger is not available anymore I found a cross reference replacement easily on this site. Plugged this new charger in and charged 2 batteries I ha d not used in 12 years. It took about 8 hours of charging for each battery, as recommended on other posts, and to my amazement both batteries hold a charge and work perfect. Easy ordering and product arrived in 5 days using cheapest shipping method. Very satisfied..
Did you find this story helpful?
Thank you for voting!

The battery was old and defective. Needed new charger

Robert from Farmington Hills, Michigan

10 of 10 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588, 2607335511
No repair done. I just started using new batteries after using the new charger.
Did you find this story helpful?
Thank you for voting!

Found the correct battery charger for my drill, ordered it and got it in 3 days and it worked great.

Roger from Santa Ana, California

10 of 10 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Was able to find and Replace the Battery Charger for my 18 Volt Skill Drill in about 15 minutes on line.
Ordered it and received it in 3-days and it fit the battery and charge up in an hour and
was very satisfied with the whole process.
Rod, CA
Did you find this story helpful?
Thank you for voting!

Battery for cordless drill was dead and had to be replaced

Bill from Bakersfield, California

6 of 6 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Replacement part was exact duplicate, so it was a 10 second job to remove old and replace with new. I had determined ahead of time that the battery would no longer take a charge, so no skill was needed to order a replacement. In any case, this is the company to meet your needs.
Did you find this story helpful?
Thank you for voting!

Battery charger did not light up.

william from memphis, Tennessee

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Replaced battery charger, charged the battery, back in business.
Did you find this story helpful?
Thank you for voting!

charger quit working

Paul from KEARNEYSVILLE, West Virginia

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Replaced battery charger and battery
Did you find this story helpful?
Thank you for voting!

Battery would not charge.

Charles from RANTOUL, Illinois

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
1. Tested old charger, was not getting any voltage or current at the terminals
2. Put battery on new charger, immediately received a flashing green light indicating that battery was charging.
3. Waited a couple of hours until charger indicator was a solid green light.
4. Removed battery from charger, put battery into dr ill. Worked perfectly!
Did you find this story helpful?
Thank you for voting!

Battery and charger were bad.

Carl from Brooklyn, Ohio

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588, 2607335511
Just needed to plug in the charger for the initial charge.
Did you find this story helpful?
Thank you for voting!

Charge was broken, wouldn\'t recharge a battery

Steve from Lawrenceburg, Kentucky

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
1619X07588
Replace the charger
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP19507663
Manufacturer Part Number: 1619X07588
Brand Model Number Description
Skil 2240 Cordless Drill - Cordless Drill Driver
Skil 2240-01 Cordless Drill - 12V Cordless Drill Driver
Skil 2240-02 Cordless Drill - 12V Cordless Drill/Driver
Skil 2250 Cordless Drill - 14.4 Cordless Drill/Driver
Skil 2250-01 Cordless Drill - 14.4 V Cordless Drill Driver
Skil 2260 Cordless Drill - 18V Cordless Drill/Driver
Skil 2260-01 Cordless Drill - 18 V Cordless Drill Driver
Skil 2320 Cultivator - Pump
Skil 2365 Drill - Cordless Screwdriver
Skil 2367 Cordless Drill - Cordless Screwdriver
Skil 2368 Drill - Cordless Screwdriver
Skil 2390 Cordless Drill - Cordless Screw Driver
Skil 2420 Miscellaneous - Air Pump
Skil 2465 Cordless Drill - (F01200) 12 V Cordless Drill
Skil 2466 Cordless Drill - Cordless Power Drill
Skil 2467 Cordless Drill - (F01200) 12 V Cordless Drill
Skil 2468 Cordless Drill - (F01200) 12 V Cordless Drill
Skil 2469 Cordless Drill - (F01200) 12 V Cordless Drill
Skil 2484 Cordless Drill - (F01200) 12 V Cordless Drill
Skil 2490 Drill - Cordless Screw Driver
Skil 2565 Cordless Drill - (F01200) 14.4 V Cordless Drill
Skil 2566 Drill - Cordless Drill Driver
Skil 2567 Cordless Drill - (F01200) 14.4 V Cordless Drill
Skil 2568 Cordless Drill - (F01200) 14.4 V Cordless Drill
Skil 2575 Circular Saw - (F01200) 14.4 V Cordless Saw
Skil 2585 Cordless Drill - (F01200) 14.4 V Cordless Drill
Skil 2866 Cordless Drill - Cordless Drill
Skil 2867 Cordless Drill - (F01200) 18 V Cordless Drill
Skil 2868 Cordless Drill - (F01200) 18 V Cordless Drill
Skil 4567 Jig Saw - (F01201) Jig Saw