Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Parts fit and solved problem.
Saw is up and running again, part fit perfect.
Guest - June 7, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair
More than I expected. Back up and running in no time
Guest - August 3, 2020
Verified Purchase
★★★★★
★★★★★
Exactly What Was Needed
The very helpful online schematic made the part easy to identify and order. Part arrived in an reasonable amount of time and the repair was pretty straightforward
Guest - May 25, 2022
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove blade, assemble base plate and metal work board with 4 countersunk screws. Remove old base plate with allen wrench, install new base plate, drive out set pin on roller set bracket and remove, install new roller set bracket, reinstall blade.
Remove c-clips on both sides of the shaft of blade guide wheel. Tap the pin out from the middle of wheel. Remove wheel and washers. Insert new bearing into new wheel and center it in the middle of wheel. Put new washers on both sides of new wheel. Reinstall wheel on saw and insert new pin. Tap pin through and center it. install new c-clip
... Read mores.
1. Removed the base Plate and angle guide
2. Punched pin out holding assembly to the saw
3. Attached Roller bracket assembly by driving the pin in
4. Attached the angle guide to base plate
5. Attached base plate
1. Removed the roller wheel assembly which required a steel punch.
2. Installed the new assembly improvising using a stainless steel cotter pin in place of the steel pin of the original.
Remove the e-rings from the shaft
Remove all of the old parts
Place the bearing inside of the roller
Line up roller and washers in the bracket
Push the pin through
Install the e-ring on each side of the pin
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19505196
Manufacturer Part Number: 1619P01375
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
