1)Removed all the torx screws from broken hammer drill used a flat head screw driver to pry apart the housing pieces.
2)laid the new housing next the old piece to transfer the wiring harness and weave it into the new piece.
3)Transferred the trigger to the piece.
4)Snapped the front half of the housing onto the back
... Read morehalf.
This took some effort and some patience as the two housing haves did not want to stay together
5) I put some of the screws on the handle loosely to hold the half\'s together.
6) With the housing half\'s together I tightened the screws then pushed the housing on to the motor housing then started tighten the four screws that connect the handle to the motor housing.
This was the hardest part for me because your basically tapping
The long screws into plastic holes. It took time with a lot of coordination by tightening those screws equally until the housing
Was cinched up to the motor housing. A longer torx handle would have made this easier.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19500271
Manufacturer Part Number: 16051082HZ
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
