Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Blade shaft repair
The part I received was perfect. The repair was not as simple as described. The instructions I found were not very help
Guest - April 16, 2020
Verified Purchase
★★★★★
★★★★★
This was a fairly complex repair.
My saw works just fine now. However, the installation of the part was complex and time-consuming. This is not to say that it was not worth it as this is a great saw and the repair was cost-effective.
William - June 5, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1 Removed base plate.
2 Removed all case screws, opened case. Care was taken to fully remove the air valve for the dust blow off.
3 Removed screws, and the blade oscillation assembly from the motor.
4. Removed the plastic blade release slide.
5. Carefully knocked the pin from the upper side of shaft assembly.
... Read morer />6. Carefully knocked out the pin holding the lower blade guide.
7. Removed the blade shaft assembly.
8. Removed the two springs behind the shaft assembly.
9. Liberally applied grease to shaft assembly parts to new assembly.
10. Replace the springs.
11. Place blade shaft assembly in housing.
12. Replace both pins.
13. Align the blade shaft so that the motor driven oscillation bushing will fit inside the blade shaft cup when assembled.
14. Assemble the two halves of the blade oscillator assembly.
15. Replace the screws holding the two halves together.
16. Align the blade guide to fit into its proper place.
17. Assemble the case, and replace all screws.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19498587
Manufacturer Part Number: 1600A00HG2
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 1600A00HG2 Bosch Tool BLADE SHAFT ASSEMBLY")
_WW_1.gif "Part Location Diagram of 1600A00HG2 Bosch Tool BLADE SHAFT ASSEMBLY")
