Part Location Diagram of 10TWQ Shimano NAVI6XT ROLLER CLUTCH ASSBLY

See part 5447 in the diagram

NAVI6XT ROLLER CLUTCH ASSBLY 10TWQ

Manufactured by:: Shimano
ERP Number:: ERP19493779
Part Number:: 10TWQ

$24.73

A Bit Difficult

1- 2 hours

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Questions & Answers Repair Instructions

Troubleshooting

This part works with the following brands:

Shimano

This part works with the following products:

Spinning Reels

Part# 10TWQ replaces these:

RD5447,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

1- 2 hours

(3 rated repairs) ?

< Prev
1
Next >

Sort by:

Anti reverse not working

HENRY from PHILADELPHIA, Pennsylvania

1 person found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers, Wrench set
Parts Used:: 10TWQ, 10DCK, 10DA2, 106F8

Removed Anti-Reverse Cam,Anti-Reverse Cam Ring,Anti-Reverse Cam Spring,Roller Clutch Assembly. installed new ones. Anti reverse worked good again.

Did you find this story helpful?

Reel bearings were corroded.

JOSEPH from CLEARWATER, Florida

0 of 1 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: Less than 15 mins
Tools:: Pliers, Screw drivers
Parts Used:: 10TWQ

Remove spool.
Pull off washers and gear.
Remove small screw.
Remove nut.
Pull apart reel.
Remove and replace roller clutch.
Reinstall all parts.

Did you find this story helpful?

Needed overhauling.

Gilberto from Deltona, Florida

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 1- 2 hours
Tools:: Pliers, Screw drivers, Wrench (Adjustable), Wrench set
Parts Used:: 10TWQ, 10PGQ, 10M45, 10JYG, 10GVN, 10GVL, 10FVF, 10BGD, 104PT, 104KA

Replaced all worn out and old parts. Added lube.

Did you find this story helpful?

< Prev
1
Next >