Remove Plastic Belt Cover ( 1/2 \" Wench needed ) Then Remove old belt pieces, Then insert new belt and maneuver it around the pulleys and tensioner and then check if installed properly then test operation of machine. If it is all right then replace protective cover and go back to work.
Did you find this story helpful?
Thank you for voting!
Both belts where broke and reverse cable had broke
Mostly followed Pony Troy-Built (2012 model) manual, but found getting the belt on was much easier if I first disconnected the forward clutch cable which released the tension pulley.
Any difficulties I had I would blame on my own boob-ery..with which I have been long gifted.
Did you find this story helpful?
Thank you for voting!
Troy bolton rototiller in BAD need of maintainance. Replaced drive belt, changed oil. Runs now like 5 years old. 1974 vintage.
Took off metal shroud with wing nuts. Stuck hand in and wrestled for 40 min. with what path to pull old belt out with. Pried it past pulleys with screwdriver. Wrestled another 20 min. getting new one back in. SUCCESS. It meant a lot that you folks knew the right belt that would fit. If it had been the wrong size, I would have needed c
... Read morelean underwear!
Changed the oil and put in new gear oil and these three activities put the tiller back in business.
Think I\'ll try the reverse belt next. It looks easier.
Thanks again.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19308032
Manufacturer Part Number: 954-04094
Tiller
- 15020s Pony Viii Opc (5hp)(S/N S0254904-S0268636)
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 954-04094 Husky BELT-V FWD DRV 4")
_WW_1.gif "Part Location Diagram of 954-04094 Husky BELT-V FWD DRV 4")
