Part Location Diagram of 753-04115 Husky TRIG:THROT:MTD RED
See part B-3 in the diagram
( Grid squares measure 1x1 inch )

TRIG:THROT:MTD RED 753-04115

Manufactured by:
Husky
ERP Number:
ERP19282280
Part Number:
753-04115
Original Equipment Manufacturer ?
$13.66
Special Order

Easy 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

The throttle trigger attaches to the throttle trigger spring. This genuine item is supplied by the original equipment manufacturer for use with trimmers made by Troy-Bilt, MTD, and Yard Machines. This part is made of plastic and is available individually. During the installation process, a screwdriver might be needed to replace this part. It will need to be replaced if it breaks.

Troubleshooting

This part works with the following brands:
  • Yard Machines
  • MTD
  • Troy-Bilt
This part works with the following products:
  • Trimmer
Part# 753-04115 replaces these:
753-04115,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

S-hook on end of throttle cable broke + trigger was starting to crack

Rick from High Point, North Carolina

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
753-04115, 746-04085A
1. Took plastic cover off of carburetor to access linkage.
2. Disassembled trigger handle assembly
3. Removed old trigger and throttle cable, saving trigger spring
4, Removed molded end clip from new cable assembly
5. Cut off approximately 1\" of old cable shield and added to new (sliced down side, then slipped ove r new cable at trigger end) as new shield didn\'t take up enough slack
6. Connected cable carburetor and re-attached cover
7. Attached other end to trigger, place trigger and old spring back in handle assembly
8. Assembled handle assembly
Did you find this story helpful?
Thank you for voting!

The trigger broke off.

Roger from Emmaus, Pennsylvania

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
753-04115
Carefully remove the screws and spread them out on the table always have a clean tabletop to work with so you can put things back the way they came. How to remove the return spring without noting which direction it went so by trial and error went back together pretty good. Not my first time. Normally maintain all of my tools.
Did you find this story helpful?
Thank you for voting!

The throttle trigger was broke

Lester from ROGERSVILLE, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
753-04115
It was easy I took picture of the old trigger. Before I put the New trigger on. It works great thanks for the New part.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19282280
Manufacturer Part Number: 753-04115
Brand Model Number Description
MTD 41AD26OG900 Trimmer - Handheld Trimmer
MTD 41AD26SC900 Trimmer - Handheld Trimmer
MTD 41AD725C900 Trimmer - Handheld Trimmer
MTD 41AD725G900 Trimmer - Handheld Trimmer
Yard Machines 41CDY28G000 Trimmer - 41CDG000 2-Cycle Gas Trimmer
Troy-Bilt TB15CS Trimmer - Trimmer
Troy-Bilt TB26CO Trimmer - Gas Trimmer
Yard Machines Y26CO Trimmer - Trimmer
Yard Machines Y26SS Trimmer - Trimmer
Yard Machines Y28 Trimmer - 2-Cycle Gas Trimmer
Yard Machines Y725 Trimmer - Trimmer