Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
19273153-1-M-Husky-736-04309-WASHER-FLAT 1.015
Part Location Diagram of 736-04309 Husky WASHER-FLAT 1.015
See part F-63 in the diagram
( Grid squares measure 1x1 inch )
19273153-1-S-Husky-736-04309-WASHER-FLAT 1.015 Part Location Diagram of 736-04309 Husky WASHER-FLAT 1.015

WASHER-FLAT 1.015 736-04309

Manufactured by:
Husky
ERP Number:
ERP19273153
Part Number:
736-04309
Original Equipment Manufacturer ?
$5.95
Special Order
Minimum Quantity of 2 required

Easy 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is a genuine Troy-Bilt replacement part that has been sourced from the original manufacturer to be used with roto-tillers. The metal washer attaches to the tiller shaft. This item is used to provide spacing between the bushing and the clip that secures the bushing to the shaft. This item is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Troy-Bilt
  • Cub Cadet
  • MTD
This part works with the following products:
  • Tiller
  • Lawn Mower
  • Lawn Tractor
  • Snow Blower
Part# 736-04309 replaces these:
1166-1, 736-04309, GW-1166-1, GW-RJ-42, GW-RJ-59, GW-RJC-42,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Axle oil seals were leaking on my Troybilt Horse tiller

Steve from Covina , California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Socket set, Wrench set
Parts Used:
921-04034, 736-04309, 736-04260, 736-04258
Remove both wheels after setting rototiller on blocks by driving out roll pins.
Using hammer and narrow screwdriver drive the screwdriver through the seal and pry out of casting.
Remove circlip from both sides of axle.
Remove old thrust washers and replace with new.
Install new circlips on both sides of axle.
Apply a small amount of gasket sealer to outside of axle seals.
Push seals over axle ends and with an appropriate size piece of pipe and carefully tap into place.
Reinstall wheels using new roll pins to secure to axle.
Read less
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19273153
Manufacturer Part Number: 736-04309
Brand Model Number Description
Troy-Bilt 0360 Tiller - Horse-Silver Anniversary(8hp) Tiller
Cub Cadet 100 Lawn Tractor - Pro Z Kw 160-L Zero Turn Rider
Troy-Bilt 10056 Tiller - Horse Iii
Troy-Bilt 12055 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12056 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12057 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12059 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12060 Tiller - (0100101-Up) 3HP Roto-Tiller
Troy-Bilt 120603HP Tiller - 12060 3hp Roto-Tiller (S/N 0012160-Up)
Troy-Bilt 12061 Tiller - 3hp Roto-Tiller
Troy-Bilt 120613HP Tiller - 12061 3hp Roto-Tiller (S/N 120610100101-Up)
Troy-Bilt 12062 Tiller - Pony Opc (5hp)
Troy-Bilt 12064 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12066 Tiller - Pony Opc (5hp)
Troy-Bilt 12068 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12069 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12071 Tiller - PTO Horse Tiller
Troy-Bilt 12074 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12077 Tiller - 3hp Roto-Tiller
Troy-Bilt 120773HP Tiller - 12077 3hp Roto-Tiller (S/N 120770100101-Up)
Troy-Bilt 12079 Tiller - Junior Vi Opc (4hp)
Troy-Bilt 12080 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12081 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12082 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12083 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12086 Tiller - Econo-Horse(6hp)
Troy-Bilt 12087 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12087C Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088 Tiller - Horse-Opc (7 And 8hp) Rototiller
Troy-Bilt 12088C Tiller - Horse-Opc (7 And 8hp) Rototiller
WASHER-FLAT 1.015
$ 5.95
Special Order
Minimum Quantity of 2 required
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖