1. Follow manual instructions for replacing belt.
2. Use Allen wrenches to remove spindle hand wheel, spindle pulley and sensor collar.
3. Loosen & remove cover on right of head stock.
4. Use mallet to drive spindle out of head stock. Locking key in spindle, be sure to keep & install in new spindle.
5. Remove bear
... Read moreing from spindle. SNAP RING PLIERS required.
6. New spindle is slightly different from original. COVER FROM RIGHT SIDE OF HEAD STOCK must be attached to spindle before reinstalling
7. Reinstall bearing, SNAP RING PLIERS required. Reinstall locking key.
8. Reinstall spindle into head stock, tightening all spindle pulley, sensor collar and hand wheel. Be sure belt is in correct position on pulley as installation is completed.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19160469
Manufacturer Part Number: JT9-JWL1221VS-106A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
