This is a Performax 16-32 sander that had a broken height adjustment handle.
I drove the pin out with a small punch and removed the broken handle.
The Jet parts were the same as the Performax so it was easy to replace the handle and
drive the new pin in with a hammer and punch. The larger knob was an improvement.
Put a wood block under the sanding drum so it doesn\'t drop when you drive out the pin. Using a ball peen hammer and the right size drift pin, drive out the old pin. Take the old handle assembly off the shaft and insert the new assembly in it\'s place. Line up the pin holes and drive in the new pin. Raise the drum and take out the block.
... Read moreYour now ready to sand. It took longer to type this than it took to replace the assembly.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
