Removed grates and heat plates.
Sprayed with penetrant and wire brushed the inside and where burners met on wall of grill housing.
Used pliers to grab burners and gently rock to loosen and lift off of mounting screws in rear.
Once all burners loose I lifted entire assembly out of grill.
Removed stickers from new p
... Read morearts and cleaned to ensure no glue or paper inside holes.
Using old assembly for reference I re assembled new components and installed reverse of removal.
Coated grates with oil and seasoned for about 45 min @ 400* .
Read less
Did you find this story helpful?
Thank you for voting!
Grids and flav r wave Bars needed to be replaced from wear and tear
1.Unboxed all of the new parts
2.Removed the old grids and placed them into the empty boxes
3.Removed the old Flav-R-Wave bars and placed them into the empty boxes.
4.Use the shop vac to removed any residual ash, metal flakes, debris, etc.
5.Install the new Flav-R-Wave bars
6.Install the new grids
7.Gri
... Read morell some meat!
Removed the old parts and put in the new parts. Everything fits perfectly.
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
