Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
19013282-1-M-Oregon-91PX052G-Chainsaw Chain - 3/8 Pitch, .
Part Location Diagram of 91PX052G Oregon Chainsaw Chain - 3/8 Pitch, .
See part A-60 in the diagram
( Grid squares measure 1x1 inch )
19013282-1-S-Oregon-91PX052G-Chainsaw Chain - 3/8 Pitch, . Part Location Diagram of 91PX052G Oregon Chainsaw Chain - 3/8 Pitch, .

Chainsaw Chain - 3/8 Pitch, . 91PX052G

Manufactured by:
Oregon
ERP Number:
ERP19013282
Part Number:
91PX052G
Original Equipment Manufacturer ?
$26.07
★★★★★
★★★★★
3 Reviews
Special Order

Easy 

30 - 60 mins 

(2 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This saw chain is a low kickback chain. It met the kickback performance requirement of ANSI B175.1 when tested on a representative sample of chainsaws. Its safety features significantly reduce the hazard of kickback while maintaining high cutting performance. _b_All cutting chain can kickback_/b_, which may result in severe personal injury to the chainsaw operator or bystanders. Operate your chainsaw safely. Read all warnings in your chainsaw operator manual.

Troubleshooting

This part works with the following brands:
  • Craftsman
This part works with the following products:
  • Chainsaw
Part# 91PX052G replaces these:
91PX052CK, 91PX052G,
★

Customer Part Reviews

?
4.7
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    2
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Chainsaw chain was perfect fit
The chain fit my Craftsman 14" saw perfectly. There were no hassles during or after the order.
Harlan - November 20, 2019
Verified Purchase
★★★★★
★★★★★
Installed chain and work’s perfectly.
Ordered a chain for an old craftsman electric chain saw. I didn’t think I would find one because it is an old saw. Looked it up in your list of parts and there it was.Fits perfect and cuts great. Thank you
Guest - December 22, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Chain arrived pretty quickly and I was able to install onto chainsaw fairly easily.
Guest - April 25, 2019
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Priming bulb and fuel lines were rotten and falling apart. Alcohol fuel additives will dissolve old fuel lines and primer bulbs

Dennis from Mililani, Hawaii

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers
Parts Used:
91PX052G, 530037793, 530069608, 530071835, 530031163
1. Remove any fuel from the fuel tank
2. Remove upper and side covers
3. Remove 2 air filter hold down nuts which also holds carburetor to engine
4. Remove plastic choke lever from carburetor by pinching tabs and pushing through hole for access in order to run the new fuel lines
5. Remove old fuel line remnants fro m carburetor connections and fuel tank penetrations and inside fuel tank, including the fuel pickup filter (replace if necessary)
6. Replace fuel lines through tank penetration holes by splitting new hose about 1/2\' and cutting off one side, then insert into tank hole and pulling through with long nose pliers. Note that there are 2 sizes of tubing used, one for the fuel pickup and the other for priming bulb return to tank. Recommend using at least E10 (10% alcohol fuel) tubing (yellow). E 80 tubing is also available, but very expensive.
7. With the pickup filter attached to the tubing, leave enough tubing length inside the fuel tank so that the pickup can flop around and reach all parts of the tank at any angle.
8. Complete remaining tubing runs. Since the original tubing on my saw had fallen apart, it was necessary for me to go to the internet to find a diagram on where to hook up the tubing to priming bulb and carburetor. This info was not in the owners manual, and not as obvious as you might think.
9. Added some fuel, primed the carburetor, and the saw ran perfectly! Good luck on your project!
Read less
Did you find this story helpful?
Thank you for voting!

lawnmower

Gary from Clayton, North Carolina

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
91PX052G
took carborator off, put new carborator on that I bought from you it was perfect thank you.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19013282
Manufacturer Part Number: 91PX052G
Brand Model Number Description
Craftsman 35831440 Chainsaw - Gas Chainsaw
Craftsman 35834050 Chainsaw - Electric Chainsaw
Craftsman 358341000 Chainsaw - Chainsaw
Craftsman 358341040 Chainsaw - Electric Chainsaw
Craftsman 35834110 Chainsaw - Chainsaw
Craftsman 35834111 Chainsaw - Chainsaw
Craftsman 35834111X Chainsaw - Chainsaw
Craftsman 358341140 Chainsaw - Electric Chainsaw
Craftsman 358341143 Chainsaw - Chainsaw
Craftsman 358341150 Chainsaw - Chainsaw
Craftsman 358341151 Chainsaw - Chainsaw
Craftsman 35834120 Chainsaw - Chainsaw
Craftsman 358341240 Chainsaw - Electric Chainsaw
Craftsman 358341250 Chainsaw - Chainsaw
Craftsman 35834140 Chainsaw - Chainsaw
Craftsman 35834141 Chainsaw - Chainsaw
Craftsman 35834150 Chainsaw - Chainsaw
Craftsman 35834160 Chainsaw - Chainsaw
Craftsman 35834180X Chainsaw - Chainsaw
Craftsman 35834251 Chainsaw - Chainsaw
Craftsman 35834760 Chainsaw - Electric Chainsaw
Craftsman 35834810 Chainsaw - Electric Chainsaw
Craftsman 358350440 Chainsaw - Gas Chainsaw
Craftsman 358350441 Chainsaw - Chainsaw
Craftsman 358350540 Chainsaw - Gas Chainsaw
Craftsman 358350940 Chainsaw - Chainsaw
Craftsman 358350941 Chainsaw - Chainsaw
Craftsman 358350942 Chainsaw - Chainsaw
Craftsman 358350951 Chainsaw - Chainsaw
Craftsman 358350952 Chainsaw - Chainsaw
Chainsaw Chain - 3/8 Pitch, .
$ 26.07
Special Order
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖