It is a genuine manufacturer-sourced component which is specially designed for use with Bostitch nailers. This is an identical replacement for a missing or a faulty movable nose piece that was originally installed on a new unit. It is the part that helps to push the nail. Please make sure to check the owners manual and the appropriate diagram of your model for the correct location and application of this part. Keep in mind this high-quality nose is made of durable metal and is sold individually.
Troubleshooting
This part works with the following brands:
Bostitch
This part works with the following products:
Nailer
Part# 9R209479 replaces these:
9R209479,
Videos For installing this part.
?
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Disconnect nail gun from air source.
2. Use a small flat head screwdriver to pry loose the 2 round plastic retainers that help keep the plastic movable nose cover in place.
3. Use the same small flat head screwdriver to pry the two plastic \"legs\" off of the two pins from which the plastic retainers were removed and th
... Read moreen remove the plastic nose cover away from the nailer while sliding the cover in the direction of the tip of the nailer (some bending of the flexible plastic cover is required).
4. Remove the inhex (allen) bolt (3mm head) which attaches the movable nose to the nailer being careful not to lose the coil spring and noting the position of the spring (large opening vs. small opening in coil spring) and the \"t\" piece of the movable nose.
5. Replace the movable nose being careful to properly orient the coil spring, install and tighten the allen bolt, install the plastic cover being careful to pry to \"legs\" up over the locating pins and push on the two round plastic retainers.
6. Don your safety glasses, attach air hose and test fire nailer into wood surface.
7. Congratulate yourself on a job well done and vow to accurately place all nails in the connector nail hole to prevent fracturing the movable nose again.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18990434
Manufacturer Part Number: 9R209479
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/power-tool/nailer/hoses-and-tubes/"},{"position":3,"name":"9R209479","title":"9R209479","url":""}]
