NOTES: The tubing in hard and you will need to gently heat it to shape it. You will need to heat it to remove it and install it. I don\'t have a heat gun so I used a lighter.
DO NOT USE OIL! This tool does not get oiled as other air tools. Oil, especially WD40, will rot the o-rings and degrade the plastic parts. That\'s why mine b
... Read moreroke.
ALSO: if you\'re not good at remembering assembly and disassembly draw a diagram.
1. Remove the torx screws and split the two halves of the tool ( make sure the pin retainer o-ring doesn\'t fall and get lost) also make sure you note the position of the trigger safety spring
2.Remove the hoses from the valve and cylinder ( you will need to heat the ends)
3.pre-form the cylinder tube (use heat)
4. Attach the tubing to the nipples (Heat the ends) Take care not to stress the nipples the plastic is rigid and doesn\'t bend.
5. Reassemble and position the parts as per your diagram if you needed one.
6. The two halves may not mesh together. This is because you need to align the drive mechanism by using a thin screwdriver to push it into place.
6. Before you put the screws in make sure the slide to load the staples works properly.
Mine didn\'t and I had to loosen the screws back up and make sure it was free.
7. Now you\'re done. just put the screws back in and test it.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18990287
Manufacturer Part Number: 9R201463
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Nailer","title":"Nailer","url":"/parts/power-tool/nailer/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/power-tool/nailer/hoses-and-tubes/"},{"position":3,"name":"9R201463","title":"9R201463","url":""}]
_WW_1.gif "Part Location Diagram of 9R201463 DeWALT TUBE")
_WW_1.gif "Part Location Diagram of 9R201463 DeWALT TUBE")
