Collar - Pu
Genuine Porter Cable replacement part, this item i sold individually.
This part acts as a seal and a spacing collar for the nail guns listed below.
This is a neoprene part and it has a tendency to deteriorate.
It may be a good idea to check on the condition of this part periodically.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Great part , easy repair work out well
Ordering was easy as company gives a very good parts breakdown drawing to figure out what part you need. Part arrive within a week.
Guest - July 31, 2019
Verified Purchase
★★★★★
★★★★★
Great quility part
IPB was easy to follow and understand. The part was a little pricey for an injected molded part but it was a perfect fit!
Guest - August 2, 2019
Verified Purchase
★★★★★
★★★★★
nailing again,
easy to order, came in quickly
Guest - August 9, 2019
Verified Purchase
★★★★★
★★★★★
Correct part
Diagnosed problem with nail gun. Ordered recommended replacement part. Collar arrived next day, fit correctly, nail gun good as new.
Guest - September 11, 2019
Verified Purchase
★★★★★
★★★★★
Worked as expected
Part was easy to find and order from web sight. Arrived on time. Will order from them again if needed.
Guest - September 16, 2019
Verified Purchase
★★★★★
★★★★★
Easy to use website. Customer service friendly and knowledgeable.
I placed your site into my favorites list. Part worked perfectly. Look forward to ordering from you again.
Guest - November 2, 2019
Verified Purchase
★★★★★
★★★★★
Perfect fit 15 minutes and back in business
As they said just like the old one but new fit perfect
Guest - January 28, 2020
Verified Purchase
★★★★★
★★★★★
Pleased With Parts & Service
I bought my framing nailer in 2004. Some of the parts occasionally need replacing. I like buying from eReplacements because they provide an exploded view of my nailer, have an easy web page to navigate for ordering, provide tracking information on my parts, and my favorite part: I don’t even have to leave my house!
Todd - March 2, 2020
Verified Purchase
★★★★★
★★★★★
Service, availability, service, speed, service
The part was a perfect fix. I am so happy to know there is a speedy source to rely upon for my service needs. Oh, by the way, the replacement parts diagram is so easy to identify. Thanks, you're the greatest!
Guest - March 16, 2020
Verified Purchase
★★★★★
★★★★★
Nail gun repair
Part arrived as promised, fit properly and saved an old nail gun from the trash. Most of all, saved a lot of money over the cost of a new one.
John - April 16, 2020
Verified Purchase
< Prev
1
2
3
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the top cover from the nail gun. The collar was broken so I pulled it off and cleaned up the pieces that had broken off of it. Put the new collar on the cylinder. Replace the top cover.
Did you find this story helpful?
Thank you for voting!
Air coming out of the exhaust port when connected to air hose without touching anything.
Removed the head to investigate. Observed damage to collar. Reviewed the diagram on website. Done deal. Have used this site a couple of times. Works awesome.
Did you find this story helpful?
Thank you for voting!
Porter Cable framer not firing and blowing air out back
Unscrew 4 allen screws from top cap of gun. Be careful on pulling top off - keep all parts in order. The old collar was cracked. Gently pry off old collar (semi-hard plastic), make sure new collar is oiled well. Snap on new collar. Put the top back on and tighten screws.
very important to drop 2-4 drops of air tool oil in the ai
... Read morer chuck before EVERY use - it really helps in longevity of the gun.
Read less
Did you find this story helpful?
Thank you for voting!
Both the collar and piston stop were crack and pieces broken off, allowing air to leak out. There for the nail gun would not operate.
This was an easy repair, you should down load the parts diagram on ereplacementparts web site, to ensure that all parts are replace in the correct order.
Did you find this story helpful?
Thank you for voting!
Collar was cracked and leaking air through the top
Remove 4 large hex nuts at the top of gun and simply pull out old collar and replace it with the new one. Make sure you lightly re-oil the gun before use!
Remove top with 4 screws and replace collar then reinstalled. Worked perfectly
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
