Does this part fit my model?
Need help finding your model number?Jump to:
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Hello Steve, Thank you for the question. Here is a repair story from a pervious customer that may help. Used vice grips to remove the nut (plastic head was super worn down, so a regular wrench wouldn't have worked for me... Turn RIGHT to loosen). Wedged a big flathead under the fan and turned to pry the fan loose from the motor shaft. Popped on the new METAL replacement fan (normally used by a more expensive model) and re-tightened the nut. Works great. We hope this helps!
1 person found this helpful.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Original plastic fan/chipper worn down / worn out
Michael from St. Petersburg, Florida
Replace leaf impeller with metal version
Jonah from Raleigh, North Carolina
Worn Fan
Carl from Arnold, Maryland
Blower Vac would not mulch the leaves
Wayne from Rio Rancho, New Mexico
The impeller was worn.
debra from GREEN COVE SPRINGS, Florida
| Brand | Model Number | Description |
|---|---|---|
| Black and Decker | BV5600 | Leaf Blower / Vacuum - Blower Vac |
| Black and Decker | BV6000 | Leaf Blower / Vacuum - Blower Vac |
| Black and Decker | BV6600 | Leaf Blower / Vacuum - Blower Vac |
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
