Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
The part was exactly as described & a perfect
The part was just as described & a perfect fit
Guest - May 12, 2020
Verified Purchase
★★★★★
★★★★★
great service, always the right part
good fit easy to install
Frank - June 3, 2020
Verified Purchase
★★★★★
★★★★★
very happy
perfect replacement part. quick shipping
Guest - September 25, 2021
Verified Purchase
★★★★★
★★★★★
part fit and worked great
received the parts quickly and they fit and worked very good
Guest - February 1, 2022
Verified Purchase
★★★★★
★★★★★
Easy repair! Parts were an exact replacement!
Fast shipping, parts were exact replacement. will shop here again!
Guest - June 28, 2022
Verified Purchase
★★★★★
★★★★★
Exact replacement...same plastic as the original part.
Yes the part fits perfectly and I had no issue disassembling the old black plastic motor housing with the replacement silver colored housing. The old silver housing used on previous models does fit and replace the new black housing of the Lithium models.
So why 4 stars? Because the part is exactly the same as the original (except the old one was black and the new one silver) which means, the one I just replaced will be broken in a year or so too. :o(
Look at it this way, if I knew that these plastic housings "burn out" over a fairly short usage time (20 hours a year..maybe?) , would I have bought this B&D Model in the first place? Probably not.
So due to the quality, of the or lack of it in the replacements part I gave it a 4 star.
As someone had described, the metal bearings are pressed into a plastic races molded into the motor housing which is cheap and as we know...the plastic race can't the heat or movement against a metal bearing.
This isn't eReplacement parts issue in any way...it's a B&D's issue. Call it planned obsolescence?
I AM happy that these replacement parts are priced fairly cheaply, because if they were more expensive I probably would have trashed the whole unit.
Guest - August 2, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(3 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Long grass had wrapped around the gear assembly shaft, got hot and melted the motor housing bearing holder. With no solid support the gear assembly misaligned and the metal motor gear shaved off much
1. Remove the string guard
2. Remove all screws holding the damaged motor housing together.
3. Pry off one half of the damaged housing to expose the motor and gear assembly.
4. Remove the gear assembly from the other half of the damaged motor housing.
5. Remove two screws from the motor power cord hold down plate t
... Read moreo free the motor cord from the damaged motor housing assy.
6. Remove the other half of the damaged housing to expose the motor.
7. Place the motor into the new motor housing half.
8. Secure the motor power cord in the new housing by screwing the motor power cord hold down plate.
9. Insert the new gear assembly into the new motor housing assembly half
10. Place the remaining new half over the motor and gear assembly.
11. Make sure you have the head rotation release button positioned properly
12. Screw the two motor housing halves together
13. Replace the string guard.
The gear assembly bearing is a press fit into the motor housing. I had to place the bearing as far into the motor housing bearing holder as it would go, then screw the two halves of the motor housing together. This pushed the gear fully into the bearing holder.
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
