1) I removed the eight or so screws from the side of the jigsaw body.
2) I separated the two halves of the body enough to extract the old part and replace it with the new part, playing close attention to how the part was seated in the tool.
3) I put the two halves back together making sure all wires and parts were in their cor
... Read morerect spots.
4) I put the screws back in.
Removed the casing via star head for screws and small flat head to pry the body apart. Kept the unit flat on the bench. Noted the position of the guide and the plastic insert in the guide. Left the pin holding the guide
in part of the casing to recall where it went. Removed the old guide arms then removed the plastic insert ( stab
... Read moreilizer) from the old to put in the new. Installation takes a tad of finesse but it\'s easy. The plastic insert is not included with the new one so don\'t lose the old one. Aligned pin to connect the casing.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18988261
Manufacturer Part Number: 90545786
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
