This is a genuine Ryobi replacement part. The outlet tube assembly is designed by the manufacturer for use in pressure washers. This part is made of metal and comes with a pre-installed plastic O-ring. It is used to connect the pump assembly with the hose. You may require pliers or a wrench when replacing this item. This part is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
great part
o.e.m. exact fit
Guest - May 20, 2019
Verified Purchase
★★★★★
★★★★★
Well made
The part was better quality then the one that was originally on the machine I replaced
Guest - July 8, 2019
Verified Purchase
★★★★★
★★★★★
Easy to replace!
Stripped the threads on my outlet tube on my Ryobi pressure washer. Thought I wouldn't find a replacement. Then I found them here and works again.
Thanks for having the part in stock.
Guest - August 18, 2019
Verified Purchase
★★★★★
★★★★★
Part worked as expected
Part arrived in the time expected. Worked as advertised.
Guest - October 2, 2019
Verified Purchase
★★★★★
★★★★★
Fast Service
Worked perfectly.
Carlos - August 25, 2020
Verified Purchase
★★★★★
★★★★★
A perfect fit
This is where you go if you need oem replacement parts.
Guest - November 26, 2020
Verified Purchase
★★★★★
★★★★★
Needed a part
Part fit perfectly lass than a minute to install.
Guest - June 27, 2022
Verified Purchase
★★★★★
★★★★★
The right place
Great place to find hard to get parts or replacement parts. Very timely and good service.
Guest - June 22, 2023
Verified Purchase
★★★★★
★★★★★
Easy to replace
Working fine
Guest - May 13, 2019
Verified Purchase
★★★★★
★★★★★
easy repair,
Perfect fit but I placed my order and it took a month to receive my part after saying it would be 710 business days!
Guest - May 9, 2019
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Removed the u shaped insert holding the tube, removed the old tube
2. Cleaned and lightly greased the inside of the tube socket
3. Inserted the new tube being careful to align the insert groves in the new tube with the socket
4. Inserted the u shaped insert by carefully tapping it into place with the mallet
5.
... Read moreTried out the pressure washer, bingo....worked great...no leaks.
Removed the cover and soap container by removing the screws on the bottom of the unit. Then remove the 2 small brackets that hold the pump housing to the base. You can see the retaining pin for the tube, but you need to remove the pump to have clearance to remove the small retaining pin that holds in the outlet tube. Once you remove the p
... Read moreump, use a flat-blade screwdriver to ease out the retaining pin, and use a pliers or similar tool to pull out the old outlet tube. Put the new tube in, being careful not to damage the threads, reinstall the retaining pin, reattach the pump housing to the base, and finally, reinstall the soap container and cover.
Read less
Did you find this story helpful?
Thank you for voting!
Hose connector was stripped and the hose end was broken.
Carefully pull horseshoe pin from outlet hose assembly with channel lock pliers. Save for later.
Pull outlet from pump manifold with fingers.
Insert new outlet assembly, taking care to align slots in manifold.
Insert horseshoe pin back into slots and carefully squeeze in place with pliers. take care not to bend the pin.
... Read more
Read less
Did you find this story helpful?
Thank you for voting!
Striped threads. Had to replace because it striped the threads on my spray hose.
Removed the rewind reel for old hose. Disconnected the hose connector discarding the tubing and tearing down to the outlet site. Hole saw for cutting hoke for new and better hose. The Ryobi connecter fit perfectly and the washer works better than it ever did. You tube video shows the description of the work.
WHAT I LEARNED
In order to get at the u-ring, you have to remove the entire plastic casing, about 8 screws.
In order to get the u-ring out without damaging or bending it, vise grips are best but pliers will do.
In order get the u-ring back in, even with a little grease it would not slide back in fully.
What I had
... Read moreto do was tap it in with a hammer.
A rubber mallet would be even better.
Just be careful not to bend the u-ring.
Very simple to change out. Half a dozen screws to remove & one lock pin. Pulled pin remove stripped fitting replaced with new. 15-20 minutes to complete
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18784005
Manufacturer Part Number: 308862007
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Pressure Washer","title":"Pressure Washer","url":"/parts/power-tool/pressure-washer/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/power-tool/pressure-washer/hoses-and-tubes/"},{"position":3,"name":"308862007","title":"308862007","url":""}]
