( Grid squares measure 1x1 inch )

MOTOR ASSEMBLY 205099001

Manufactured by:
Homelite
ERP Number:
ERP18782607
Part Number:
205099001
Original Equipment Manufacturer ?
$39.96
In Stock
Delivers in 3-5 Business Days!

Difficult 

1- 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Ryobi
This part works with the following products:
  • Trimmer
  • Hedge Trimmer
Part# 205099001 replaces these:
205099001,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Difficult 

1- 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The motor quit suddenly and after opening the housing I found that one of the brushes on the motor was worn completely away! No sign of it anywhere and I could tell that the motor had been running wi

Steven from New Freeport , Pennsylvania

7 of 7 people found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
1- 2 hours
Tools:
Screw drivers
Parts Used:
205099001
This tool has many wires routed through the plastic body pieces with no obvious best path. In retrospect I should have taken pictures of them as I disassembled the tool to save lots of time and frustration in final assembly. Your phone camera is your best tool!
It\'s been a while since I did this, but as I recall:
1. Remov ed the front handle.
2. Opened up the housing by removing numerous torx screws.
3. Removed the bolts holding the blade assembly.
4. Opened up the gear case and removed the screws holding the motor.
5. The motor is now loose and I cut the two wires and removed it.
6. The gear case had grease inside and I spread grease near the location of the gears to ensure lubrication.
7. Screwed the motor to the gear case and assembled the gear case.
8. Soldered the motor wires but using a crimp or wire nut would also work.
9. Reassemble the remaining parts in reverse order. This is where patience and/or frustration creeps in trying to route the wires properly. Unless you\'re a better mechanic than me you won\'t get it right the first time.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18782607
Manufacturer Part Number: 205099001
Brand Model Number Description
Ryobi RY40602 Hedge Trimmer - 40 Volt Hedge Trimmer
Ryobi RY40602VNM Hedge Trimmer - 40 Volt Hedge Trimmer