The unit is a Honda WX-10 pump. Replacing the seals required the disassembly of the pump cover, removal of the impeller and the motor from the suction base. The removal of the motor can be a pain as the 4 bolts holding them together become corroded chance of breaking them is inevitable. Once separated the base seal may be pushed out and t
... Read morehe new seal installed this is the easy part. The other half of the seal needs to be installed into the back side of the impeller this is not the easiest to do. Make sure all the corrosion is removed and a slight radius on the edge. Apply a small amount of lube to the pocket in the back side of the impeller the seat the rubber seal and ceramic disc also apply a small amount of lube on the seal surface for the dry start up.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18775158
Manufacturer Part Number: 78130-YE9-505
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
