This is an authentic manufacturer-sourced part which is specially designed for Snapper lawn and garden equipment. It is an identical replacement for a missing or faulty blower belt that was installed on a new unit. Unfortunately, over time the material will wear out and it may begin to crack and stretch eventually requiring a replacement to maintain peak performance. Keep in mind this high-quality belt is made of durable rubber and is sold individually.
I separated the bucket/auger assembly from the rest of the unit. This allowed me to get into the housing and remove belt dust and inspect the rest of the working parts. placed the new belts on and put it back together
Did you find this story helpful?
Thank you for voting!
Blower drive slowed and would not throw snow very far
1. Removed the 4 - 1/2 inch bolts between the blower and the motor
2. Split the case open (should mostly fall once last bolt is removed)
3. Removed both belts for inspection
4. Replaced belts in reverse order
5. Adjusted tension on the belt per the online manual
Did you find this story helpful?
Thank you for voting!
Belts were worn and stretched, plus the driven disc was cracked
1. Separated the collector from the engine half to get to the driven disc, otherwise, the belts could have been replaced by removing belt guard and the bottom panel.
Did you find this story helpful?
Thank you for voting!
both drive and blower belts slipping 20 plus years old
Jim from SPARLAND, Illinois
1 personfound this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1. Removed the blower assembly from the drive train.
2. Removed the belt pulleys from blower assembly.
3. Removed the blower drive assembly from blower housing.
4. Removed impeller from drive shaft.
5. Removed augers from axle.
6. Removed gearbox cover.
7. Removed axle from gearbox.
8. Removed wor
... Read morem gear from axle.
9. Clean all parts, re-grease, and reverse steps.
10. Idler springs are a pain to re attach, but not impossible.
Read less
Did you find this story helpful?
Thank you for voting!
Tiller belt was worn causing clogs and shorten throw of snow.
Separated tiller body from engine and frame. Removed old belts from pulleys and tensioners. Fed new belts around pulleys and tensioners ensuring alignment. Rejoined tiller body to engine and frame. Rookie experience, big hands and tight spaces made the project longer than anticipated.
Did you find this story helpful?
Thank you for voting!
Impeller belt on snowblower was too stretched out to engage
Followed the instructions in the snowblower manual on how to change the belt. There are many steps.
As it turned out, the hardest part was releasing and reinstalling too springs. Not to easy to get them off without them shooting off. Fortunately I didn\'t lose them. Putting them back on was complicated by the lack of cl
... Read morearity of where they actually attached and no instructions on how to reinstall them. One just hooks on the pully holder, the other fits into a hole on the drive belt pully holder. the drive belt pully holder needs to be on the wrong side of the belt to reattach the spring, then pulled back onto the other side of the drive belt.
Eventually, I figured that out, but it consumed about half of the time of the job.
Read less
Did you find this story helpful?
Thank you for voting!
Chain case (essentially the transmission) wore out due to operation hours
Snow Blower
- Snapper Snowblower Model 7084370 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
