Part Location Diagram of 1731914ASM Murray BLADE MOWER
See part C-23 in the diagram
( Grid squares measure 1x1 inch )

BLADE MOWER 1731914ASM

Manufactured by:
Murray
ERP Number:
ERP18589688
Part Number:
1731914ASM
Original Equipment Manufacturer ?
$33.80
In Stock
Delivers in 3-5 Business Days!

A Bit Difficult 

30 - 60 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This item has been sourced from the original manufacturer and is intended to be used with riding lawnmowers from snapper. The coated metal blade attaches to the spindle shaft assembly. Overtime lawnmower blades can wear down and become dull. This can cause the ends of the grass to become frayed and discolored. Replacing the dull blade can provide a cleaner cut and improve the look of the lawn. This part is sold individually.

Troubleshooting

This part works with the following brands:
  • Snapper
This part works with the following products:
  • Lawn Mower
  • Lawn Tractor
Part# 1731914ASM replaces these:
1731914ASM,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Worn bearing, spindle, blade replacement

David from MONETT, Missouri

3 of 3 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
1- 2 hours
Tools:
Socket set, Wrench set
Removed deck, removed pulley on top of shaft for blade, removed blade, spindle washer and bearing. Replaced parts and reassembled. Same for other blade, filled both with grease and mounted deck back to mower. When I started mowing, found that top lock nut holding down pulley was louse, tightened and returned to mowing.
Did you find this story helpful?
Thank you for voting!

Lawnmower blades were cracked/broken

Adam from Nicholson, Georgia

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
1731914ASM
1. Remove V belt from tractor PTO and blade pulleys.
2. Remove lawnmower deck from tractor.
3. Remove old blades with ratchet/socket; use vise grip on top of deck to keep pulley from spinning.
4. Install new blades; tighten with ratchet and vise grip.
5. Reconnect deck to tractor.
6. Route V belt back around pulleys.
Did you find this story helpful?
Thank you for voting!

Wasn\'t cutting the grass

Scott from RAYMOND, New Hampshire

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Socket set, Wrench set
Parts Used:
1731914ASM, 1731917SM
1 Jack up front of mower, put jack stands to hold it up
2 Remove nut from blade, holding blade with 2x4 up against the side
3 Replace spindle washer, blade, and fender washers
4 Remove jack stands lower mower
5 Cut grass
Did you find this story helpful?
Thank you for voting!

Blades no longer in cutting

Anthony from Elberton , Georgia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
1731914ASM
Jacked up mower, slid 3 in pipe over old blade to secure it removed bolt holding blade on , installed new blade, repeat on other blade . Lower mower done!!!
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18589688
Manufacturer Part Number: 1731914ASM
Brand Model Number Description
Snapper 1695138 Lawn Tractor Accessories - 38" Rotary Mower
Snapper 1695146 Lawn Tractor Accessories - 38" Rotary Mower
Snapper 1695455 Lawn Tractor Accessories - 38" Rotary Mower, (Fr)
Snapper 2690440 Lawn Mower - Snapper Lawn Mower Model 2690440 Parts
Snapper 2690441 Lawn Mower - Snapper Lawn Mower Model 2690441 Parts
Snapper 2690497 Lawn Mower - Snapper Lawn Mower Model 2690497 Parts
Snapper 2690577 Lawn Mower - Snapper Lawn Mower Model 2690577 Parts
Snapper 2690593 Lawn Mower - Snapper Lawn Mower Model 2690593 Parts
Snapper 2690685 Lawn Mower - Snapper Lawn Mower Model 2690685 Parts
Snapper 2690796 Lawn Mower - Snapper Lawn Mower Model 2690796 Parts
Snapper 2690819 Lawn Mower - Snapper Lawn Mower Model 2690819 Parts
Snapper 2690863 Lawn Mower - Snapper Lawn Mower Model 2690863 Parts
Snapper 2690864 Lawn Mower - Snapper Lawn Mower Model 2690864 Parts
Snapper ELT18538 Lawn Tractor - 38" 18.5 Hp Hydro Drive Euro Tractor Rmo Lt200 Series
Snapper ELT18538F Lawn Tractor - 38" 18.5Hp Hydro Drive Euro Tractor Rmo Lt200 Series
Snapper LT18538 Lawn Tractor - 38" 18.5 Hp Hydro Drive Tractor Rmo Lt200 Series
Snapper LT2042 Lawn Tractor - 42" 20 Hp Hydro Drive Tractor Rmo Lt200 Series
Snapper LT22500 Lawn Tractor - Front-Engine Lawn Tractor