18532812-1-M-Husqvarna-586244802-Assy - Lower Engine Housing

( Grid squares measure 1x1 inch )

18532812-1-S-Husqvarna-586244802-Assy - Lower Engine Housing

Assy - Lower Engine Housing 586244802

Manufactured by:: Husqvarna
ERP Number:: ERP18532812
Part Number:: 586244802

$26.94

A Bit Difficult

15 - 30 mins

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Enter your model number

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

The lower engine housing is made out of plastic. When replacing this part a screwdriver and a socket set might be required during the installation process. It will require replacing if it becomes broken. This item is available individually. It is a genuine replacement part sourced from the original manufacturer for use with blowers made by Weed Eater.

Troubleshooting

This part works with the following brands:

Weed Eater
Husqvarna

This part works with the following products:

Leaf Blower / Vacuum
Trimmer

Part# 586244802 replaces these:

545196201, 545196203, 586244802,

Questions & Answers

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult

15 - 30 mins

(4 rated repairs) ?

< Prev
1
Next >

Sort by:

Pull start would not retract

Shawn from RAHWAY, New Jersey

3 of 3 people found this instruction helpful.

Difficulty Level:: Easy
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 586244802

Removed lower housing from the upper. Replaced entire assy.

Just some info though. The assy does not come with the starter cord and handle like it shows in the diagram. I was able to just cut my old one And use it. But if you are buying this as an easy way to replace a broken pull cord it will not work.

Did you find this story helpful?

Recoil in lower house would not retact

Larry from Davenport, Iowa

2 of 2 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 586244802

1. Disassembled bower
2. Remade lower housing
3. Put new rope in recoil
4. Installed new housing
5. Reassembled bower
6. Started bower

Did you find this story helpful?

Blower starter rope wont retract

John from Harrod, Ohio

2 of 2 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 15 - 30 mins
Tools:: Screw drivers, Socket set
Parts Used:: 586244802

Remove the old lower engine housing and install the new lower engine housing.

Did you find this story helpful?

Starter rope was stuck out would not retract

Mike from Evansville, Indiana

0 of 1 people found this instruction helpful.

Difficulty Level:: A Bit Difficult
Total Repair Time:: 30 - 60 mins
Tools:: Pliers, Socket set
Parts Used:: 586244802

1. removed blower cover
2. removed impeller and scroll housing assembly
3. removed lower engine housing
4. removed starter rope from old assembly feed it into new starter pulley
set tension on new pulley and slowly released pulley to wind starter rope into
lower engine housing reassembled scroll ho ... Read more

Read less

Did you find this story helpful?

< Prev
1
Next >

Model Cross Reference

This part works with the following models:

ERP Number: ERP18532812
Manufacturer Part Number: 586244802

Brand	Model Number	Description
Weed Eater	FB25	Leaf Blower / Vacuum - Handheld Blower