The left case attaches to the right housing. This part is made of plastic and is available individually. It is a genuine replacement part sourced from the original manufacturer for use with pruners and saws made by Poulan. When replacing this item a screwdriver and a socket set might be required during the installation process. It will require replacing if it becomes broken.
Troubleshooting
This part works with the following brands:
Poulan
This part works with the following products:
Chainsaw
Lawn Tractor Accessories
Part# 576897201 replaces these:
576897201,
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
The repair was very easy. Removed the cover over the chain and gear (left cover) with a Philips head screwdriver. Removed the two nuts, used my socket set, so I could remove the chain and guide plate. The sprocket gear now lifted out on a slight angle. The teeth on the inside of this gear were all messed up and missing in some spots. This
... Read more is the main reason the chain would stop or not move properly. While it was all apart I cleaned the saw as much as possible. I then reversed the process to put the chain saw back together. Replacing all the parts I ordered due to either being broken, worn or missing. Oiled where ever I thought would be needed. The chain saw is now working like new, cutting with ease! Thank you for having all the correct parts I needed and at good prices. Jim
1. Removed damaged case assembly
2. Removed chain which came off the rail
3. Removed extension on chainsaw so to line up and reinsert chain
4. Put on new case and 2 screws
5. Tightened up chain via screw adjustment
6. Plug in to test (electric chainsaw)...had to readjust the case and screws some.
7. Cut
... Read more small tree down and saw worked marvelous...again
The part fit perfectly,and was installed effortlessly with a screwdriver and 2 screws.
The saw is like new again.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
