Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect Fit
This carb was a perfect fit and nearly $50 cheaper than my local shop. Very easy to find the proper carb using the step by step search on the site. usually when you order items like this the gaskets are some one size fits all and you have to modify them, Not the case here. Everything fit perfectly. I installed it, cycled the key three times to get fuel in the bowl and then started it on the first try. The only minor issue is that it was shipped USPS and they don't update the shipping information as quick as other shippers, so tracking was poor on USPS end.
Guest - September 3, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
Easy
15 - 30 mins
(5 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Remove air cleaner assembly and air cleaner base. Remove the throttle spring and the throttle linkage.Remove the fuel line from the carburetor and either plug the line or use fuel line clamp to stop the fuel from flowing.Remove the old carburetor, and install the new one. Put all the part back on ib reverse order. You\'re done.
The mower had been sitting for a couple of years, so I drained the gas and decided to replace the fuel filter and used the carburetor kit. Was very easy to fix.
Did you find this story helpful?
Thank you for voting!
Carburetor fouled and gummed up
Melvin from Aransas Pass, Texas
4 of 4 peoplefound this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench set
1. Better if the fuel tank is empty, but if not clamp off the main fuel line to keep fuel from running out.
2. Disassemble breather assembly.
3. Pull primary and secondary air filter.
4. Two nuts and one bolt need to be removed to pull filter housing.
5. The two nuts removed from step 4 will also loosen the carbur
... Read moreetor.
Under both push rods, one is throttle, other is choke.
6. Pull old carburetor.
7. Reassemble in reverse order.
Easy job, little time consuming! Not a super skilled repair.
Removed air filter housing, removed fuel line, removed the two nuts and one bolt holding carburetor on. Unplugged fuel solenoid wire. Slid old carb off and carefully turned it to remove throttle and choke linkage. Replaced gasket. Reconnected throttle and choke linkage on new carb. Slid new carb on to studs. Tightened bolt holding so
... Read morelenoid ground wire. Reconnect fuel line. Replace airfilter housing and tighten the two nuts holding it. Replace air filter and external cover. Add gas. Start engine.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP18499668
Manufacturer Part Number: KH-20-853-33-S
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(2007)_WW_12.gif "Part Location Diagram of KH-20-853-33-S MTD CARBURETOR ASM")
(2007)_WW_12.gif "Part Location Diagram of KH-20-853-33-S MTD CARBURETOR ASM")
