Part Location Diagram of 1181134 Penn Main Gear Assembly
See part 8N in the diagram
( Grid squares measure 1x1 inch )

Main Gear Assembly 1181134

Manufactured by:
Penn
ERP Number:
ERP18262072
Part Number:
1181134
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

15 - 30 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is an authentic Penn replacement part manufactured for use with spinning reels. The main gear assembly is driven by the handle assembly to actuate the crosswind and pinion gears that cause the rotor to revolve around the spool when reeling in line. This main gear assembly is available as an individual replacement part, please see model diagram for associative parts.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Penn
This part works with the following products:
  • Spinning Reels

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(1 Review)
Click to filter by ratings:
  • 5 stars
    1
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Main gear teeth(pot metal casting) had oxidized from salt water exposure

Jose from Corpus Christi, Texas

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Parts Used:
1181134
Took apart main body of reel, 4 side plate slot head screws, used solvent to degrease assembly. Two slot head screws on main shaft, slide bar retainer removed. Pull main shaft out, allows main gear to be replaced. Spent most time just cleaning assembly out.
Did you find this story helpful?
Thank you for voting!

Main gear teeth were broken

Brynner from Honolulu, Hawaii

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
1181134
1. Removed handle
2 Removed retaining screws and body plate
3. Removed shaft
4. Removed broken main gear
5. Clean out the reel body
6. Grease and oil all internal parts
7. Installed new main gear
8. Installed the shaft
9. Put body plate on
10. Put in retaining screws
11. Put han dle back on
12. Crank test reel
13. Success
Did you find this story helpful?
Thank you for voting!

Main gear in my Penn 5500 SS reel was worn out. I could feel it skipping so I knew there was something wrong.

Morris from Mililani, Hawaii

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench (Adjustable)
Parts Used:
1181134
Ordered a replacement main gear. Replacement was fast and easy.
1. Remove the drag knob and spool.
2. Remove reel handle from left side of reel if installed.
3. Remove the four screws that hold the left side cover with a flathead screwdriver.
4. Remove the side cover with bearing.
5. Remove two flat head scre ws that hold the crosswind block plate.
6. Remove spool shaft assembly.
7. Remove main gear.
8. Apply grease to new main gear and install.
8. Reassemble in reverse order.
Did you find this story helpful?
Thank you for voting!

Worn gears.

Marco from NORTH PALM BEACH, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers, Screw drivers
Parts Used:
1192502, 1191808, 1181134
1. Disassembled reel.
2. Cleaned all parts thoroughly.
3. Reassembled reel.
Easy Peasy
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18262072
Manufacturer Part Number: 1181134
Brand Model Number Description
Penn 4500SS Spinning Reels - Spinfisher Ss Graphite Spinning Reel
Penn 450SSG Spinning Reels - Spinfisher Ss Graphite Spinning Reel
Penn 5500SS Spinning Reels - Spinfisher Ss Graphite Spinning Reel
Penn 550SSG Spinning Reels - Spinfisher Ss Graphite Spinning Reel