Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
easy repair
I got a grinder unit replacement for my DeLonghi automatic espresso maker. The replacement part popped right in, connected two wires and was ready to make coffee again. We used to have an authorized repair place close to our house, but he retired and we would now need to mail it in for service. This was quick, easy and a lot less expensive.
Guest - June 29, 2019
Verified Purchase
★★★★★
★★★★★
Exact replacement
These folks were the only ones to have this part. Works great.
Guest - March 30, 2024
Verified Purchase
★★★★★
★★★★★
Perfect Replacement. Save the capacitor and top gasket from the Original Though
This worked out perfectly. Only caution is the original had a capacitor soldered/spliced across the wires on the original and this did not. So I needed to solder that on to it and use heat shrink tubing to cover the splice. Perhaps it is not needed on the new one but I played it safe and soldered it since I have plenty of experience soldering wires.
Guest - May 30, 2019
Verified Purchase
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
A Bit Difficult
30 - 60 mins
(2 rated repairs)?
< Prev
1
Next >
Sort by:
Sorry, we couldn't find any existing installation instruction that matched.
Was actually pretty easy. Removed back, side and top screws and panels. Lifted out old grinder and inserted new one. Routed wires as originally placed. Put back together and works greatGǪtotal of about 7 screws, 5 of which require tx20 bit, but overall simple replacement that would cost several hundred dollars to send in for repair when
... Read moreI got estimates first.
!. Remove the back screws to remove back plate.
2. Remove sides that sort of snap in, no screws
3. Remove screws holding the top on (located on the sides). Removed Steam knob from front and removed the little tab on the inside that locked the cappuccino nozzle in place. It pulls out. Kind of hard. Was afraid of breaking but it
... Read more did come out.
4. Remove screw holding main circuit breaker to free up space to remove grinder.
5. Remove grinder.
6. Original grinder had a capacitor across the two wires, so cut that off of the original and soldered/spliced the capacitor onto the wires of the new grinder.
7. Reverse steps to close up the machine.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP17825464
Manufacturer Part Number: AS00005650
Espresso Machine
- Ecam44660b Type Ecam44660b Ver: Ca, Us (0132215281)
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
