Vise Assembly N510986

Inserted new wrench holder
Had to make a trip to a nut and bolt emporium to purchase the two (2) metric bolts to install the vice assembly. That took almost half an hour. Other than not having the two required bolts the process went well

1.vise assembly- Removed the two cap bolts holding broken assembly to base and then slipped new assembly into place and secured it with the original cap bolts.
2. Power cord- removed the torx screws holding handle together and then removed two more torx screws securing power cord to handle. I then removed the torx screw holding t ... Read more he trigger to the handle. Finally I removed the two screws on the trigger assembly, one for black wire and one for white wire. Cutting the new cords wire ends to the appropriate length. I attached the appropriate ring terminals to the wire ends. I then reversed what I did to disassemble it. Attach wires to trigger, Attach trigger to handle. Secure cable to handle and feed cable appropriately thru handle assembly. Reassemble handle. Test on GFI circuit for proper operation. I needed to get A/C rated ring terminals of the appropriate size because they didn\'t come with the power cord.