Debris Shield Kit, Gt-225 P021053910

Manufactured by:
Echo
ERP Number:
ERP17608719
Part Number:
P021053910
Original Equipment Manufacturer ?
$26.80
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(4 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This shield assembly is an original Echo part manufactured for use with trimmers. The plastic shield is used to protect the user from flying trimmer clippings. This shield is complete, included is the bolt, and wing nut to mount the shield, and also included is the blade used to cut excess trimmer line. The shield assembly is sold individually.

Troubleshooting

This part works with the following brands:
  • Echo
This part works with the following products:
  • Trimmer

Videos For installing this part.

?
Replacing your Debris Shield Kit, Gt-225

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(4 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

We needed to install these items because they were broken from a lot of use.

Brianna from Price, Utah

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
P021053910, A232001850
We just removed the old shield with a screw driver and socket set. We opened up the top part of the trimmer shield, slid it onto the trimmer, spun it into correct position then tightened the nut. The air cleaner cover did not need any tools because they were just over hand tight. We just unscrewed the cover, put it in our recycle bin and put the other one on.
Did you find this story helpful?
Thank you for voting!

Needed a new shield assembly.

Ron from Oak View, California

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Parts Used:
P021053910
1. Removed the wing-nut, lock washer, and bolt.
2. Fixed shield assembly on the shaft.
3. Replaced the bolt, lock washer, and wing-nut.
4. Hand tightened the wing-nut.
Did you find this story helpful?
Thank you for voting!

Broken shield

Earl from RIVERSIDE, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Socket set
Parts Used:
P021053910
Very simple repair even though I had to make a collar for it to fit my older weed eater
Did you find this story helpful?
Thank you for voting!

Shield was cracked

Valerie from Wellington, Nevada

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
P021053910
1. Took the cracked shield off.
2. Replaced it with the new part.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP17608719
Manufacturer Part Number: P021053910
Brand Model Number Description
Echo GT-225 Trimmer - String Trimmer
Echo GT-225I Trimmer - String Trimmer
Echo GT-225L Trimmer - String Trimmer
Echo GT-225SF Trimmer - String Trimmer