Part Location Diagram of AS13200251 DeLonghi Water Tank
See part 15 in the diagram
( Grid squares measure 1x1 inch )

Water Tank AS13200251

Manufactured by:
DeLonghi
ERP Number:
ERP17016539
Part Number:
AS13200251
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(20 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This genuine OEM replacement water tank is designed for use with DeLonghi Magnifica coffee makers. It serves as the reservoir for holding the water required to brew coffee, ensuring consistent performance and beverage quality. Constructed from durable, high-quality plastic, this tank is built to withstand daily use and is sold individually. No tools are required for installation—simply remove the existing tank and insert the new one into place. For optimal results, refer to your coffee maker’s user manual to ensure proper fit and maintenance.

Troubleshooting

This part works with the following brands:
  • DeLonghi
This part works with the following products:
  • Coffee Maker
  • Espresso Machine
Part# AS13200251 replaces these:
7313228241, 7313254511,

Customer Part Reviews

?
4.6
Average Rating (out of 5):
★★★★★
★★★★★
(12 Reviews)
Click to filter by ratings:
  • 5 stars
    10
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    1
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
  • 1
  • 2

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(20 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

This is a very complex machine. For several months I noted water oozing at the bottom on all sides.

Richard from Fair Oaks, California

8 of 8 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
After a thorough online review, it seemed that about the only thing I could simply address is leaking gaskets. Therefore, I changed out the water tank--which involved gaskets. Now after several days, I do not notice any extraneous water! I\'m quite thrilled on this Merry Christmas night!!
Did you find this story helpful?
Thank you for voting!

Fill Tank notice came on even when tank was full

Debbie from Eagle , Idaho

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
Replacing the water tank corrected the \"Fill Tank\" error - easy peasy! No tools necessary
Did you find this story helpful?
Thank you for voting!

Fill Tank command would not let coffee maker complete start-up.

David from Chicago, Illinois

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
Pry silver water tank front off original water tank. Place original silver tank front plate onto new water tank. Fill tank with filtered water and insert tank into coffee maker. It worked. Cloudy water plastic tank shielded sensor ability to read existence of needed water level, there inhibiting startup procedures.
Did you find this story helpful?
Thank you for voting!

would be nice to know that the front plate has to be removed from the old tank and attached to the new one.

Nicholas from SARASOTA, Florida

1 person found this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Parts Used:
AS13200251
Tried to figure out how to remove the tank without ruining it.
Did you find this story helpful?
Thank you for voting!

frother and water tank leaks

Steve from Oklahoma City, Oklahoma

0 of 1 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
AS13200153, AS13200251
1.Tank soaked in hot water to loosen end cover which was not replaced. with some force popped it off cause it did not want to slide.
2. dissembled back cover first by removing screws. took a little force to remove it. each side then was removed. would have been nice to know to slide it up since it has some hooks at the top.
3 . frother was just 3 screws. The small o ring inside the cavity where the plastic water line attached was retrieved with a toothpick and reused in the new frother assembly.
4. reassembled sides and then back cover making sure the panels were positioned properly. I had to do this several times as the water tank side panel needed to interlock properly with the bottom.
5. After about 45 minutes, I tested the frother and tank. success-no leaks.
Did you find this story helpful?
Thank you for voting!

Simply swap out water tank

Terry from SALT LAKE CITY, Utah

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
The Mmagnetic floats magnet wore out causing the out of water signal to always be on. I previously changed the switch inside the Delonghi expresso machine but the out of water signal still came on when tank was full. The float system worked. But apparently the magnet lost its power. Getting a new water tank with a new magnet float sol ved the problem.
Did you find this story helpful?
Thank you for voting!

broken tank

Mark from San Jose, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251, 5313251471
It was trivial. Fill tank, put cover on. Slide into place. Turn machine on. Drink coffee.
Did you find this story helpful?
Thank you for voting!

Water tank leaked

Thomas from Santa Monica, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
AS13200251
Removed damaged tank and replaced it with new one.
Did you find this story helpful?
Thank you for voting!

Leaky water tank

James from Sun Lakes, Arizona

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
Replaced it!!
Did you find this story helpful?
Thank you for voting!

Our water tank was leaking and so we replaced it with a new one.

Cindy from University Place, Washington

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
AS13200251
Replaced the water tank and it stopped leaking. Thank you.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2