Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
16318589-1-M-Dremel-2610919750-Motor Assembly
Part Location Diagram of 2610919750 Dremel Motor Assembly
See part 2 in the diagram
( Grid squares measure 1x1 inch )
16318589-1-S-Dremel-2610919750-Motor Assembly Part Location Diagram of 2610919750 Dremel Motor Assembly

Motor Assembly 2610919750

Manufactured by:
Dremel
ERP Number:
ERP16318589
Part Number:
2610919750
Original Equipment Manufacturer ?
$27.14
★★★★★
★★★★★
8 Reviews
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(11 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Jump to:

Description Troubleshooting Reviews Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This is an authentic replacement part manufactured for use with Dremel multi-tools. This is a complete motor and shaft assembly including the shaft bearing. The shaft supports the collet, collet nut, and locking pin that is used to secure the shaft when adjusting the collet. This part does not include the Collet or the Collet Nut and are sold separately. This motor assembly is sold individually.

Troubleshooting

This part works with the following brands:
  • Dremel
  • Bosch
This part works with the following products:
  • Router
★

Customer Part Reviews

?
4.9
Average Rating (out of 5):
★★★★★
★★★★★
(8 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    1
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Saved my bacon!
The motor assembly for my Dremel was shipped promptly. It was well packed and functioned perfectly. At an acceptable price point, too!
Lorenzo - January 11, 2021
Verified Purchase
★★★★★
★★★★★
Great OEM part. Easy installation.
Great OEM part. Easy installation.
Guest - May 25, 2021
Verified Purchase
★★★★★
★★★★★
Perfect match to OEM
Arrived quickly. Packaged very well.
Guest - August 2, 2021
Verified Purchase
★★★★★
★★★★★
Super
Très rapide et très bon service verry verry good service
Iglobal - November 27, 2019
Verified Purchase
★★★★★
★★★★★
Easy repair and a great product
Easy to install and equipment worked like new again, great product.
HERBERT - November 9, 2021
Verified Purchase
★★★★★
★★★★★
Fits Dremel 800
I have an older cordless Dremel 800. Like it a lot and use it a bunch. Have spare batteries for it, etc. So when it flat wore out, brushes worn down to almost nothing, I wanted to replace it rather than start over with a new model. Seriously, it was so worn out that I’d turn it on, nothing would happen, then I would start it spinning by hand, only then would it run! Problem was it’s so old that I could find nothing listed as a replacement motor. I found that the Dremel model 8000 has the same internal motor as the 800. Super easy swap. Repl motor has same spade terminals as the original. Back up and running good as new.
Guest - June 18, 2022
Verified Purchase
★★★★★
★★★★★
Great part, easy ordering, worked as expected
The part was in great condition, arrived quickly, and fit perfectly. Great job.
Guest - July 3, 2019
Verified Purchase
★★★★★
★★★★★
Part fixed fast
Great part, about 1 month to receive was a bit long just coming from Oregon. Satisfied anyway.
Guest - May 28, 2020
Verified Purchase

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(11 rated repairs) ?
  • 1
  • 2
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Dremel Drive shaft was severed

Nathan from Buffalo, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
2610919750, 2610009839
Motor/Shaft
1) Remove screws and plastic cover
2) Disconnect motor from Board
3) Open new motor
4) Connect motor to Board (if only drive shaft/motor, reassemble)

To add new lock
1) Remove screws and plastic cover
2) Remove Lock and Replace
3) Insert new spring
4) Reassemble


Read less
Did you find this story helpful?
Thank you for voting!

Lock on dremel tool stripped and could not release bit

George from Mt Zion, Illinois

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Wrench set
Parts Used:
2610919750, 2610009839
Removed and replaced motor (lock shaft was part of motor) and lock pin, spring by removing 4 screws from tool and two wires from motor. 10 min max
Did you find this story helpful?
Thank you for voting!

Couldn\'t unlock spindle

Charles from Fargo, North Dakota

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
2610919750
Replaced motor assembly
Did you find this story helpful?
Thank you for voting!

Collet lock on motor shaft worn

David from Epping, New Hampshire

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
2610919750, 2610009839
Removed the tool body. Removed the motor assembly and replaced it with the new collet lock as well. Reassembled.
Did you find this story helpful?
Thank you for voting!

Motor shaft broke

Vernon from Charleston, Arkansas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
2610919750
Replaced motor and shaft and plugged in the circuit board and put housing together and works like a new tool. Tool is 10!+ years old.
Did you find this story helpful?
Thank you for voting!

Rotary tool motor burnt out

dwight from palm bay, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
2610919750
Remove four torches screws : separate case : replace motor : re-assemble
Did you find this story helpful?
Thank you for voting!

Motor burnt out

Dwight from Palm bay, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
2610919750
Removed 6 torx screws. Removed 2 wire connectors. Installed new dremel motor. Re-install wires and screws.
Did you find this story helpful?
Thank you for voting!

Motor shaft broke

Stan from Beaumont , California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
2610919750
Took out 6 torx screws, separated the case of the dremel, took out the motor and switch, transferred the switch to the now motor and reassembled it.
Did you find this story helpful?
Thank you for voting!

Lock pin and receiving area for pin were worn.

Richard from WANTAGH, New York

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
2610919750
I opened the rotary tool, Removed motor and replaced it with the one i ordered here. It was very simple. i had ordered the new pin elsewhere. Worked perfectly. Fit perfectly.
Did you find this story helpful?
Thank you for voting!

Motor wore out

dwight from palm bay, Florida

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
2610919750
Remove chuck area nut -remove 4 torch screws.
Separate dremel halves.
Remove motor and speed control remove 2 motor wires from speed control re-install with red to red dot Re-assemble. Super easy(1minute)
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2

Model Cross Reference

This part works with the following models:
ERP Number: ERP16318589
Manufacturer Part Number: 2610919750
Brand Model Number Description
Dremel 800 Router - Rotary Tool
Dremel 8000 Chainsaw - 10.8v Cordless Rotary Tool Kit
Dremel 8000108V Router - Dummy
Dremel 8000BARETOOL-EUROP Router - Rotary Tool
Dremel 800108V Router - Rotary Tool
Motor Assembly
$ 27.14
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖