1. Remove the key, choke knob, and throttle knob.
2. Remove plastic shroud over carburetor.
3. Disconnect wires to safety key.
4. Remove primer bulb hose and fuel line from carburetor. If there is gas in the tank, clamp the hose to prevent gas from pouring out.
5. Disconnect spring and linkage from carburetor and
... Read moreslide carburetor off the bolts noting the location of the gaskets.
6. Remove start switch for access to the tank bolt.
7. Remove the V belt housing cover between motor and blower hood.
8. Remove the 3 tank bolts.
9. Clean all the gaskets and sealing surfaces for the carburetor and begin assembling the unit.
10. Clean the spark plug and change if needed.
11. Check the oil level and fill or change as needed.
12. Start it and let it run to make sure there are no issues.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12689619
Manufacturer Part Number: 951-11699A
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/lawn-and-garden/snow-blower/hoses-and-tubes/"},{"position":2,"name":"951-11699A","title":"951-11699A","url":""}]
_WW_1.gif "Part Location Diagram of 951-11699A MTD Primer Hose")
_WW_1.gif "Part Location Diagram of 951-11699A MTD Primer Hose")
