This is an authentic OEM sourced replacement component which is specially designed for Craftsman chainsaws. It fits between the carburetor and engine cylinder, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this item. Over time it may wear out, get damaged or simply get lost eventually requiring a replacement. Keep in mind this adapter is made of high-quality plastic and is sold individually.
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quality part
The part was perfect.
Guest - October 3, 2019
Verified Purchase
★★★★★
★★★★★
Great part
Jcorrect part
Guest - December 2, 2019
Verified Purchase
★★★★★
★★★★★
Perfect match
Easy to use the site and place my order...part got to me quickly and in great condition...chainsaw works like a dream now!
Guest - June 27, 2020
Verified Purchase
★★★★★
★★★★★
Excellent
The part was exactly what i needed. Outstanding fast shipping.
Guest - November 9, 2020
Verified Purchase
★★★★★
★★★★★
Great part like a factory part
I have tried buying parts elsewhere! But they never show up with the correct gaskets and you have to modify them to fit parts from a Ereplacement parts
Always seem to fit correctly I will always look here first.
Guest - February 23, 2021
Verified Purchase
★★★★★
★★★★★
worked out perfect
exact part easy fix running again
Guest - August 29, 2021
Verified Purchase
★★★★★
★★★★★
Chainsaw manifold
Worked great.
Anonymous - June 17, 2022
Verified Purchase
★★★★★
★★★★★
Carb. Adapter
Just what I needed!
Guest - September 12, 2023
Verified Purchase
★★★★★
★★★★★
Finally ok.
The first part I got arrived as just powder. The Post Office had put the plastic bag under a pallet or something and it was all just 100% broken parts. EReplacement was very professional about it, and got me a replacement right off. Still, I lost 4 work days that could have been avoided had they shipped a fragile part in a box instead of a bag.
All in all, I'd buy again. That's what counts I guess.
Guest - September 3, 2019
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
1. Took engine cover off
2. Air filter came off
3. Took the two nuts that hold filter housing and removed it
4. Disconnect the fuel lines
5. Disconnect the choke linkage from carb.
6. Disconnect the accelerator linkage and removed the carb.
7. Used a 25T wrench to remove the carb. adapter
8. Repl
... Read moreaced gasket and install in reverse sequence.
9. Readjust the HI and LOW air intake on carb.
10. Runs like a new chain saw!
I replaced Carburetor Adapter and Gaskets. It was very simple.
Did you find this story helpful?
Thank you for voting!
chainsaw had no power. Would not rev up. Turned out the plastic carb adapter was broken and caused a bad vacumn leak and was not sucking enough gas at wide open trottle.
1. removed top cover over carb and air cleaner
2. removed 2 nuts holding air cleaner and carb
3. removed carb and air cleaner and carb
4. removed 2 screws holding plastic carb adapter
5 removed gaskets and cleaned surface of old gaskets
6. replaced in reverse order
7 put in gas, start, adjust low and hi
... Read moregh carb needles
8. runs great now.
PS: do not tighten 2 nuts holding carb and adapter too much or the plastic adapter will crack!
1 removed covers
2removed carb
3removed shut off and choke assembly
4removed bolts that hold the adapter on
5removed and replaced gaskets
6Removed and replaced fuel lines
Replaced carb adapter plate on poulan chainsaw. Removed top cover to gain access to air filter and carb . Remove carb and gasket. Remove cracked carb adapter plate. Put new one on . Bottom screw a little bit of a pain but got it on. Reverse procedure. Primed started on third pull runs great . Now I got to put it to work.
Patience and remember how it came apart to replace the same way. Be sure to put airclearner in before putting on cover. Fire it up and just take sometime to tune it properly
Did you find this story helpful?
Thank you for voting!
Old carburetor assembly cracked and fuel cap leaking
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
