Part Location Diagram of 530096075 Husqvarna Drive Shaft
See part A-10 in the diagram
( Grid squares measure 1x1 inch )

Drive Shaft 530096075

Manufactured by:
Husqvarna
ERP Number:
ERP12619982
Part Number:
530096075
Original Equipment Manufacturer ?
$9.57
Special Order

Easy 

15 - 30 mins 

(3 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This flex shaft was manufactured for use with grass trimmers. The flex shaft is is driven by the motor, and it spins the trimmer head. This flex shaft fits inside the drive shaft housing, or tube. It is connected to the drive clutch at the motor, and the gear case at the trimmer head. The flex shaft is sold individually.

Troubleshooting

This part works with the following brands:
  • Weed Eater
  • Poulan
  • Craftsman
  • Husqvarna
This part works with the following products:
  • Trimmer
Part# 530096075 replaces these:
530096075,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(3 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Shaft broke

Clarence from Trenton , New Jersey

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Nutdriver
Parts Used:
530096075
Remove string end and pull out broken shaft and installed new one reassemble
Did you find this story helpful?
Thank you for voting!

Starter rope broken.

pablo from cayey, Puerto Rico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Wrench set
Parts Used:
952711548, 530096075, 530071356
Swapped the old with the new.
Did you find this story helpful?
Thank you for voting!

Took apart, greased heavily, inserted new shaft.

Robert from Birmingham, Alabama

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
530096075
Twas easy and pretty obvious. Take of cutting head from shaft. Remove shaft from motor. Pull out screw shaft. Pump new greese in shaft. Push in new shaft rod. Put back together.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP12619982
Manufacturer Part Number: 530096075
Brand Model Number Description
Craftsman 358791010 Trimmer - Weedwacker
Craftsman 358791520 Trimmer - Trimmer
Craftsman 944514550 Trimmer - Trimmer
Craftsman 944516550 Trimmer - Trimmer
Weed Eater FEATHERLITE SST PLUS Trimmer - Trimmer
Weed Eater FEATHERLITE SST25 Trimmer - Trimmer
Poulan P2500 Trimmer - Gas Trimmer
Weed Eater SST Trimmer - Gas Trimmer
Weed Eater SST25 Trimmer - Weed Eater String Trimmer Model SST25 Parts
Weed Eater SST25FEATHERLITE Trimmer - Gas Trimmer
Weed Eater W25SB Trimmer - Trimmer Edger