This is an authentic replacement part manufactured for use with Poulan chainsaws. The ring retainer is commonly used to secure the sprocket to the gear drive. This ring retainer is sold as an individual replacement part, please see model diagram for associative parts.
1. Remove chain cover and removed chain.
2. Removed Ring retainer and then the sprocket gear.
3. Removed all screws holding case together
4. Pried case apart
5. Removed old broken gear drive
6. Lubed new gear drive and dropped into place.
7. Replaced case
8. Put in all screws for case
9. Dro
... Read morepped sprocket onto shaft and installed the ring retainer. Used a ring retainer spreader tool.
10. Put the chain and chain cover back on.
Done.
Read less
Did you find this story helpful?
Thank you for voting!
Poulan Electric model ES300 - Replaced Gear Drive and Sprocket
Remove chain and bar
Empty chain oil
Remove the Star Drive Screws
Push the handle slightly forward and pull it loose.
Remove Ring Retainer and Sprocket
Remove gear drive and washer
Replace gear drive and washer (make sure washer is on same side the old one came off.
Carefully put the case cover ba
... Read moreck on engaging the gear drive
Before screwing the screws, put the new sprocket washer and washer on, but before putting the new ring retainer on, check to see that the sprocket turns the shaft from the motor.
Affix the Ring Retainer (you can use a small screw driver and needle nose pliers for this)
Replace the handle
Replace the screws..
Replace the bar and chain ( I purchased a new 16\", .050 gauge, 3/8\" Pitch Bar and Chain from Home Depot. There are no Poulan Bar and Chain for this model.
Charlie R
Plug it in and tested. works like brand new
Removed chain and bar from chainsaw after loosening tension on chain and removing the chain and sprocket gear cover. Using a release tool I removed the old ring-retainer,sprocket gear and washer.put on new washer, sprocket gear and ring retainer. re-installed the bar , chain and cover. re-tighten the chain . Repair is completed !!
1. Remove side cover
2. Remove chain
3. Remove bar
4. Remove retainer ring
5. Remove drive gear
6. Clean all of the parts
7. Reassemble using the new drive gear and retaining ring
Did you find this story helpful?
Thank you for voting!
Gear drive on this electric chainsaw is plastic. Easy to strip out if you work it hard. This is the second time IGÇÖve had to fix it in 10 years. This Poulan saw is otherwise a good saw.
1. Removed bar and chain
2. Removed chain sprocket by removing the ring retainer.
3. Removed all screws holding the casing together and pulled casing apart.
4. Pulled old gear drive out.
5. Slipped new gear drive in.
6. Reassemble casing
7. Installed new chain sprocket and retainer ring.
8. Reins
... Read moretalled bar and chain.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12605348
Manufacturer Part Number: 530042090
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
