I disconnected the air intake supply line (copper tube) off the check valve and replaced the old check valve with the new one. Then connected the air supply line to the new check valve.
Disconnected the wires to the pressure switch (make sure you unplug the power before you do anything) unscrew the pressure switch and replace it
... Read morewith the new one. Connect wires. Plug in power.
Read less
Did you find this story helpful?
Thank you for voting!
Air compressor tripped circuit breaker when starting at 120 psi
My compresser is a Husky 30 gallon C302H from Home Depot. You have to use a 7/8 inch deep oxygen sensor socket because they have a small brass 90 degree fitting on the side of the check valve and the fitting hits the top of the compressor when you try to remove it. Use the oxy sensor socket with the wide slot. Also the check valve is re
... Read moreally tight and hard to break loose.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12099430
Manufacturer Part Number: E106002
Compressor
- 60 Gallon Stationary Electric Air Compressor
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
