This is an authentic Kirby replacement part that has been sourced from the original manufacturer to be used with Kirby vacuums. The plastic tube is used to mount the disposable tubes and to link the bag to the fill tube. This item is available as an individual replacement part.
Troubleshooting
This part works with the following brands:
Kirby
This part works with the following products:
Upright Vacuum
★
Customer Part Reviews
?
4.6
Average Rating (out of 5):
★★★★★
★★★★★
(11 Reviews)
Click to filter by ratings:
5 stars
9
4 stars
1
3 stars
0
2 stars
1
1 star
0
< Prev
1
2
Next >
Sort by:
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Quality part.
Quality part. Fit on machine perfectly.
Guest - September 2, 2019
Verified Purchase
★★★★★
★★★★★
Kirby Heritage II
part was as advertised and worked, and I will order from eReplacementParts again.
Mark - October 15, 2019
Verified Purchase
★★★★★
★★★★★
Fit great and easy to replace
The part i received fit perfectly and was delivered quickly. I will use this company again. Very pleased with the part and and time it took to ship!
Phil - February 3, 2020
Verified Purchase
★★★★★
★★★★★
Easy repair
Quick service
Guest - March 2, 2020
Verified Purchase
★★★★★
★★★★★
My vacuum works like new again !
My part came quickly, along with installation instructions.
Guest - March 18, 2020
Verified Purchase
★★★★★
★★★★★
After reading the reviews it was very easy to replace. I was about to spend $150 and buy the whole bag assembly until I found just the hose replacement for less than $15.
Perfect fit replacement part. Cleans like new again.
Guest - December 14, 2022
Verified Purchase
★★★★★
★★★★★
easy repair video was vary helpful
arrived quickly
Guest - January 11, 2023
Verified Purchase
★★★★★
★★★★★
vacuume cleaner
Easy enough to do. Replacing the fill tube made the vacuum work much better. Less dust getting into the outer bag. Works great.
Guest - January 23, 2023
Verified Purchase
★★★★★
★★★★★
Vacuum pipe
Part fit properly and the shipping was quick.
Guest - January 26, 2023
Verified Purchase
★★★★★
★★★★★
Easy repair
Item arrived in a timely manner and the repair was easy. Will order from company again if need to.
Guest - April 20, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Cut zip ties
Unscrewed hose
Screwed on new hose
Installed zip ties
Did you find this story helpful?
Thank you for voting!
The hose connecting the vacuum suction to the disposable bag had a rip in it resulting in the vacuumed dust being deposited inside the outer bag instead of going into the disposable bag.
Used an exacto knife to slice the vinyl wrap holding each end of the existing hose onto their respective ends. Pulled off the old hose and replaced it with the new one. Used a pair of automotive hose clamps to re-fasten the ends. Most of the repair time was spent cleaning the dusty mess out of the outer bag before installing the new hos
... Read moree. Installing the new hose only took 5 or so minutes.
Read less
Did you find this story helpful?
Thank you for voting!
The disposable bag fill tube had worn out and leaking
1. Cut the tie wraps that held the tube to the vacuum and the bag intake
2. Some difficulty putting the new tube on the vacuum. Need to twist it.
3. Tighten the tie wraps one for each end of the tube.
4. You should connect the tube to the vacuum end first to make it easier.
5. Replace the bag and you are done.
1. Removed outer, cloth vacuum bag from vacuum.
2. Turned outer bag inside out to expose filler hose.
3. Removed old hose by snipping zip ties.
4. Slipped both ends of new hose over each plastic fitting.
5. Secured hose ends by cinching down a zip tie around each fitting.
6. Trimmed off zip tie ends with diag
... Read moreonal pliers.
7. Wrapped electrical tape over the zip ties so any sharp edges would not chafe a hole in the
hose, or inner and outer vacuum bags.
8. Turned the outer, cloth bag right-side out, attached a new disposable vacuum bag to the
hose fitting, and reattached the bag assembly to the vacuum.
Read less
Did you find this story helpful?
Thank you for voting!
The Bag Fill Tube was starting to tear open around its base.
1. Removed the bag assembly.
2. Carefully dislodged and removed the external zip tie around the base of the bag.
3. Cut off existing internal zip ties to remove/replace the fill tube.
4. Installed new internal zips to fill tube at each end.
5. Re-used external zip tie to attach bag to base.
6. Reinstalled bag
... Read more, and put vacuum back in-service.
Read less
Did you find this story helpful?
Thank you for voting!
25 year old Kirby had holes in fill tube and bag connector, debris spewed everywhere!
The most difficult part of this repair was getting the old connector off of the bag. The fill tube came off easily with scissors to the zip tie. Once I figured out HOW to get the bag off the connector, the rest was a piece of cake. No more dust blowing EVERYWHERE!!
Did you find this story helpful?
Thank you for voting!
The gasket O-ring had disappeared. The bag fill tube had a major split in it. And I needed more bags.
1. Unscrewed the damaged fill tube from both connectors.
2. Screwed the new fill tube onto the connectors.
3. Installed a new bag.
4. Vacuumed the carpet.
Removed bag from vacuum. Turned inside out in order to attach bottom pick up tube. Used zip tie to fasten. Attached Adapter to top of hose and fastened with zip tie. Installed new disposable bag to adapter and zipped vacuum bag up. Reattached bag assembly to vacuum.
Done.
1. Watched videos like Kirby enthusiast on how to take the bag off emtor.
2. Detached top of bag, inside, from loop of adapter. Used screw driver and towel to carefully release the bag clamp at emtor. Saved for later. Unfolded bottom of bag and removed from emtor. Cut shrink tape, cable ties off hose ends. Untwisted hose from emtor
... Read moreand adapter end.
3. Cleaned everything thoroughly as there was impacted filth in emtor. In hindsight, I would have bought whole assembly with emtor and bag as both are worn, or just send in Kirby for rebuild but cannot live without a vacuum.
4. Screwed hose on clean, dry emtor first (it stayed by itself when tugged) and secured w/ 2 cable/zip ties, 1 for Kirby 2.99 and 1 from bag of 11\" zip ties (3.99 for 20).
5. Then screwed other end onto adapter but it kept falling off. Secured that end with a zip tie as well, with someone\'s help as it needed tightened just so. Face the adapter to back so it is accessible through Kirby bag zipper.
6. Reassembled bag and clamp to emtor. Etc.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
2
3
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12041422
Manufacturer Part Number: K-190384
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Upright Vacuum","title":"Upright Vacuum","url":"/parts/vacuum/upright-vacuum/"},{"position":2,"name":"Hose or Tube","title":"Hose or Tube","url":"/parts/vacuum/upright-vacuum/hoses-and-tubes/"},{"position":3,"name":"K-190384","title":"K-190384","url":""}]
