New screws arrived. Expensive when shipping cost more than screws,but, could not find right screw at HD, Lowes or Ace. Install easy slice screws did not interfere with fan or motor operation.
Did you find this story helpful?
Thank you for voting!
Handle Fork Spring Bushing and Yoke were worn and broken. Handle would not stay upright.
Disassembley:
1. Removed handle/bag/emptor assembly (pulled pin from handle fork and rotated emptor counter-clockwise) and front beater-bar attachment from vacuum.
2. Carefully removed label from switch cover to reveal hidden screw.
3. Removed upper switch screw that was under label, and lower switch screw underneath low
... Read moreer/rear of vacuum.
4. Removed all 3 Motor Shell Mounting Screws (front/underneath, left, right), and removed Motor Shell. (might want compressed air outdoors to remove inner dust mess)
Inner Motor Shell Handle Spring Assembly:
5. Removed set screw, C-clip (on bushing), and D-clip (on spring shaft) from inner handle spring assembly.
6. Replaced bushing and yoke, aligned set-screw hole and replaced set-screw while spring is slid to the left on the shaft (out of the way).
7. Hooked spring on set-screw with yoke in first notch of bushing (light tension) by hand. Then used 4\" Vise Grips on bushing to tension spring and position yoke on middle notch of bushing.
8. Replaced C-clip and D-clip.
Reassembly:
9. Positioned switch to wrest on motor @ approx. 45 deg. and replaced motor shell with 3 mounting screws.
10. While holding onto the switch button, replaced upper switch screw, then flipped vacuum to replace lower screw (weird angle easy to cross-thread in shell).
11. Cleaned sticker backing and mating switch-plate surface with acetone, reattached sticker with several pieces of double-sided sticky Scotch tape.
12. Replaced handle/bag/emptor assembly with pin, and beater-bar attachment.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12041101
Manufacturer Part Number: K-138470
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
