Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
The part was an exact replacement for what i had.
After they were able to identify the model of hood I had, they were able to help identify the part I needed. The part arrived within a couple of days, was the exact replacement and was mounted almost immediately. Coouldn't ask for better service.
Guest - November 6, 2019
Verified Purchase
★★★★★
★★★★★
The part worked great
The repairman said the part was in perfect condition and it is working just great in the heater. The experience with your company was amazing!!
Guest - November 21, 2020
Verified Purchase
★★★★★
★★★★★
new heater
it is like a new fan, more quite and works well. thanks
Guest - October 20, 2021
Verified Purchase
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Remove the Broan cover plug, using a straight screwdriver remove the cover (defuser). Install new heating unit exactly how the old one was removed only in reverse.
1. Turned power off
2. Removed out side, lens and lite bulb.
3. Unplugged heater motor.
4. Unscrewed 2 screws holding motor in place.
5. Removed heater motor.
6. Installed new heater motor reverse order.
Remove plastic light cover by gently pulling to one side and down. Remove light bulb. Remove acorn nut inside light fixture and lower grill and light fixture backing plate. Unplug light fixture. Loosen (do not remove) 2 Phillips screws from heater blower unit. Unplug blower. Lift and pivot out. On the new unit I used 2 small pieces
... Read moreof shrink wrap on the pivot arms to try to make the unit quieter (it helped). Installation is the reverse procedure. I replaced grill at the same time since mine had yellowed in 9 years. Since the heater blower unit costs the same as a whole new unit, I\'d recommend buying a whole new unit and taking the parts off that you need. The main body is a pain to remove from the attic but all the components are replaceable from inside the house.
Unpluged old heater . Then l Losing The 2 screws that hold it in place. Remove the old heater Install the new heater Then tied up the 2 screws then plugged it back in
First - turn off electricity at the Electrical Panel.
Took off the vent covering with my hands, unscrew the bulb, unscrew the long screw that holds up the covering and the covering just fell gently in my hands, unplug the electrical plug and the Heater is fully exposed. All that was done with my hands ( no tool ).
... Read more />Loosened the two screws that held the Heater in the housing with a Screw Driver and angled the motor out of its housing. Unplug the Heater.
Installing the new Heater and everything else, is exactly the reverse. Now, turn on Electricity.
Read less
Did you find this story helpful?
Thank you for voting!
Bathroom ceiling heater/ventilation fan. Heater portion significant vibration and noise.
1. Turn off all power to unit at wall switch
2. Removed light bulb lens, light bulb and outer grill.
3. Loosened two screws holding heater assembly.
4. Lower assembly slightly and position key-hole so heater assembly can be removed from screws.
5. While lowering assembly with one hand, reach up into housing with ot
... Read moreher hand and unplug power cord.
6. Install new unit in reverse order.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP12009509
Manufacturer Part Number: S97017063
Bath & Ventilation Fan
- Broan Bath Fan Model HFL695 Parts
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
