Part Location Diagram of SP0000136 Breville 50mm Steam Ring
See part A-192 in the diagram
( Grid squares measure 1x1 inch )

50mm Steam Ring SP0000136

Manufactured by:
Breville
ERP Number:
ERP12007927
Part Number:
SP0000136
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(26 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

This is a genuine Breville replacement part, it is sold individually. The purpose of the 800ESXL/192 Steam Ring is to create a seal to prevent steam or hot water from leaking from between the Filter Holder Assembly and the Thermal Block Assembly. This part has a tendency to lose its ability to seal over time. It may be a good idea to order an extra one, to keep it on hand.

Troubleshooting

This part works with the following brands:
  • Breville
This part works with the following products:
  • Espresso Machine

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(7 Reviews)
Click to filter by ratings:
  • 5 stars
    7
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(26 rated repairs) ?
  • 1
  • 2
  • 3
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Unscrew the metal strainer - remove old gasket, replace and screw back on.

Kristen from Arlington, Massachusetts

30 of 30 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
This is an easy fix. There is a perforated metal disk where the water comes out of the espresso machine. Unscrew the screw in the middle, and evaluate the gasket. Mine was ripped on one edge which caused the water to spray out sideways because there was not a good seal between the machine and the coffee holder. I replaced the seal, and sc rewed the metal disk back in. That was it.

Also, Amazon was selling the part for $20 - nice to buy from this site for $1.99 for two seals.
Did you find this story helpful?
Thank you for voting!

Breville Expresso ESP6SXL machine is leaking water out of the handle.

Duong from Medford, Oregon

11 of 11 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
After removing the screw holding the steam water connector (133), I slipped in the new ring, re-install it and the machine is working like new. I bough 2 extra steam rings for spare since the price is so cheap ( $1.70 ea.) It cost more for the shipping cost than the price of all three. This is the only item that will go bad with time.
Did you find this story helpful?
Thank you for voting!

Coffee stopped

Alison from West Newbury, Massachusetts

4 of 4 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
Removed the ring - cleaned the space. Very easy! Threw out another perfectly good machine (as it turns out) a few years ago because I did not know how to fix this problem.
Fixed it this time! Good for the environment to keep these good machines going!
Did you find this story helpful?
Thank you for voting!

Leaking under pressure

Keith from Eugene, Oregon

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
SP0014935, SP0000136
Removed 4 screws holding cracked Fixing Seat and 1 screw holding Steam Ring adapter. Installed new items and reinstalled screws. The only hold up was trying to figure out which direction to install the Stem Ring, because the old one was so badly damaged it came out in pieces, but after a little trial and error it became evident.
Did you find this story helpful?
Thank you for voting!

Coffee weak

Donna from Blue Ridge, Virginia

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
1. Removed steel plate
2. Removed worn gasket
3. Replaced w a new gasket
4. Replaced steel plate
Good as new!
Did you find this story helpful?
Thank you for voting!

Coffee grounds and liquid major leak at locking mechanism

Brian from Doral, Florida

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
SP0000136
Remove center screw with short phillips screwdriver.
Remove metal steam ring, clean all debris, with fingers only, work replacement rubber ring on metal plate, replace screw, done! 30 repair that major time spent cleaning area in steam ring area.
Did you find this story helpful?
Thank you for voting!

Carafe fixing seat cracked, causing the part to leak pressurized water while brewing.

Salvatore from Brooklyn, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
SP0014935, SP0000136
1) Disconnect power and perform replacement only when the machine has been allowed to fully cool down (most important safety steps to avoid possible injuries)
2) Remove bottom water grill and overflow level indicator bar
3) Empty water reservoir
4) Put espresso machine upside down (hold water reservoir compartment door shut)
5) Remove screws that hold the bottom cover (be careful handling everything and watch out for sharp metal edges of the machine\'s body!)
6) Gently pry out the bottom water-catching plastic pan
7) Remove the 4 screws holding the carafe fixing seat
8) Remove the center screw holding the water infuser on the steam ring
9) Remove and replace the steam ring (a flat butter knife might help prying it off)
10) Mount the water infuser back on the new steam ring
11) Replace the new carafe fixing seat and mount everything back (bottom water-catching pan, bottom cover etc.

Note: some parts might need some cleaning as rust and calcium deposits might need to be removed. Use this disassembling as an occasion to do so.
Did you find this story helpful?
Thank you for voting!

Steam and water spray out around portafilter while extracting espresso shots.

Kevin from Greenwood, Indiana

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
1. Remove portafilter
2. Remove Phillips head screw in center of steam filter and steam filter should come off.
3. Remove the old worn steam ring from steam filter and replace it with the new steam ring.
4. Reinstall parts using the Phillips head screw.
5. Enjoy your favorite espresso drinks!!!:-)
Did you find this story helpful?
Thank you for voting!

Steam ring didn\'t keep a seal anymore

Beau from Royse City, Texas

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
SP0000136
Removed upper basket
Dug out old steam ring
Installed new steam ring
Replaced upper basket
Did you find this story helpful?
Thank you for voting!

Seal fatigue from enthusiastic use.

Marc from Sonoma, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
SP0000136
Flipped machine over, removed the only screw and old gasket. First attempt was upside down, so total time reflects initial error.
Did you find this story helpful?
Thank you for voting!
  • 1
  • 2
  • 3

Model Cross Reference

This part works with the following models:
ERP Number: ERP12007927
Manufacturer Part Number: SP0000136
Brand Model Number Description
Breville 800ESBSS1BCA1 Espresso Machine - Cafe Roma Espresso Machine
Breville 800ESXL Espresso Machine - 800 Class Espresso Machine
Breville BES200BSS1BCA1 Espresso Machine - The Barvista
Breville BES250BSS1BCA1 Espresso Machine - Cafe Venezia
Breville BES250XL Espresso Machine - Cafe Venezia Espresso Machine
Breville BES820BSS1BCA1 Espresso Machine - Espresso Machine
Breville BES830BSS1BCA1 Espresso Machine - Espresso Machine
Breville BES830XL Espresso Machine - Die-Cast Programmable Espresso Machine
Breville ESP6SXL Espresso Machine - Cafe Modena Espresso Machine
Breville ESP8XL Espresso Machine - Cafe Roma Espresso Machine
Breville SP0000136 Espresso Machine - Seal Showerhead 50mm