Part Location Diagram of 477134-00 DeWALT Oil Filler Cap
See part 26 in the diagram
( Grid squares measure 1x1 inch )

Oil Filler Cap 477134-00

Manufactured by:
DeWALT
ERP Number:
ERP11926553
Part Number:
477134-00
Original Equipment Manufacturer ?
$6.16
Special Order

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Black and Decker
This part works with the following products:
  • Chainsaw
  • Pole Saw
  • Trimmer
Part# 477134-00 replaces these:
477134-00,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Broken chain cover; worn plastic cover top; cracked oil filler cap

Theodore from Upper Brookville, New York

4 of 4 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Nutdriver, Wrench set
Parts Used:
588087-00, 587577-00, 477134-00
To replace the top chain cover, part 15, almost the entire machine must be disassembled because it is embedded in the main plastic housing, no part number. This is not difficult but time consuming and the sequence to accomplish the task is linear meaning there are no real options as to the next step. The security pin in the electrical c onnector screw, part 12, is easily snapped out to use a standard Torx tool. The spring in the housing, on the schematic but no part number, holding the chain cover can be a little confusing on the proper installation direction but just observe it or take a photo prior to removal and it will be much easier.

The oil filler cap part 26 can be replaced at the same time.

The chain cover, part 48, helps guide the chain cover and the plastic indent where part of the cover rotates will wear out with extended use. The replacement lacks the decals but helps keep the parts tight during operation.

Overall the repair sequence is simple, the parts easily are removed and installed, and the finished product operates better.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP11926553
Manufacturer Part Number: 477134-00
Brand Model Number Description
Black and Decker LP1000 Chainsaw - Alligator Lopper
Black and Decker LP1000-A Trimmer - Type 1 Pruner
Black and Decker LP1000-B2 Pole Saw - Electric Outdoor Lopper
Black and Decker LP1000-BR Pole Saw - Electric Outdoor Lopper
Black and Decker LP1000K Chainsaw - Alligator Lopper Kit