1. Removed the blade and all motor mount bolts, which released the shutter and shutter cover.
2. Cleaned and lubricated all removed parts
3. Replacing the shutter was tricky as the bracket and roller needed to go on the arm shaft while the shutter and cover were replaced - before the bracket could be attached to the shutter it
... Read moreself. This made the attachment of the bracket pretty tricky, requiring the arm to be in a specific position while I attempted to replace the washer and nut on top of the bolt so they would slide on the bracket.
4. Tried to replace an old rusted bolt, but wound up having to drill it out, complicating things.
5. After putting all the parts back together, there was some adjustment needed for the shutter to move freely.
6. I took the opportunity to sharpen the blade before replacing it
Read less
Did you find this story helpful?
Thank you for voting!
Mower would not back up and adjustable shoot would not move back and forth
Replace springs, bolts, special washers and bushings.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
(VIN_MAGA-1000001_to_MAGA-1299999)_WW_20.gif "Part Location Diagram of 91557-VH7-000 Honda Collar, Arm")
(VIN_MAGA-1000001_to_MAGA-1299999)_WW_20.gif "Part Location Diagram of 91557-VH7-000 Honda Collar, Arm")
