Carburetor Assembly 16100-ZE5-005
- Manufactured by:
- Honda
- ERP Number:
- ERP11889730
- Part Number:
- 16100-ZE5-005
Does this part fit my model?
Need help finding your model number?Product Description
?The carburetor is made out of metal and plastic. This authentic item is supplied directly from the original equipment manufacturer for use with Honda lawn mowers. This part is sold individually. A screwdriver, a socket set, and a wrench set might be helpful during the installation of this part. It will need to be replaced if it breaks.
Troubleshooting
- Honda
- Lawn Mower
Customer Part Reviews
?- < Prev
- 1
- Next >
Questions & Answers
?Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Customer Repair Instructions
All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.
- < Prev
- 1
- Next >
The engine was sputtering, suspected float and clogged jets. Blade was worn out.
Walter from Lewiston, New York
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set, Wrench set
- Parts Used:
- 72511-VA2-690, 16100-ZE5-005
The carburetor was a little more involved with the removal of two wing nuts (removal of air filter) four screws (removal of engine shroud) and three bolts (removal of carburetor).
Instant satisfaction after three poles. ... Read more Engine fired up and running perfectly.
would not start
Richard from Raleigh, North Carolina
- Difficulty Level:
- A Bit Difficult
- Total Repair Time:
- 30 - 60 mins
- Tools:
- Pliers, Socket set, Wrench set
- Parts Used:
- 90304-GE8-003, 16100-ZE5-005
2) Replaced flywheel key and flywheel, straightened blade holder and replaced with new keyed washer (aligned with flywheel magnet), attached blade with new Honda nuts.
3) Replaced carburetor and fuel line with new ones.
4) R ... Read more eplaced rusted/frozen brake cable (no spark).
5) Runs almost like new again. 37 years old.
The mower would not run more than at idle due to fuel starvation.
John from Huntland , Tennessee
- Difficulty Level:
- Easy
- Total Repair Time:
- Less than 15 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 16100-ZE5-005
The replacement carburetor was a perfect match and the mower started first pull.
Lawn mower would only run on choke as there was little fuel coming in.
Jay from BOUNTIFUL, Utah
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 16100-ZE5-005
Remove the air filter housing and then the carburator.
Replace with new carburator and reassemble the air filter.
Start it up.
carb was bad
Wayne from Hermann, Missouri
- Difficulty Level:
- Easy
- Total Repair Time:
- 15 - 30 mins
- Tools:
- Screw drivers, Socket set
- Parts Used:
- 16100-ZE5-005
- < Prev
- 1
- Next >
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.