Part Location Diagram of 06200-VG4-D00 Honda Transmission Assembly
See part T-2 in the diagram
( Grid squares measure 1x1 inch )

Transmission Assembly 06200-VG4-D00

Manufactured by:
Honda
ERP Number:
ERP11889279
Part Number:
06200-VG4-D00
Original Equipment Manufacturer ?
$225.66
In Stock
Delivers in 3-5 Business Days!

Very Difficult 

More than 2 hours 

(1 rated repair) ?

Does this part fit my model?

Need help finding your model number?

Troubleshooting

This part works with the following brands:
  • Honda
This part works with the following products:
  • Lawn Mower
Part# 06200-VG4-D00 replaces these:
20001-VG4-D01,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Very Difficult 

More than 2 hours 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Transmisson replacement and other control cables

Harry from ALBUQUERQUE, New Mexico

2 of 2 people found this instruction helpful.
Difficulty Level:
Very Difficult
Total Repair Time:
More than 2 hours
Tools:
Nutdriver, Pliers, Screw drivers, Socket set, Wrench (Adjustable), Wrench set
Long job !!!!!!!!!! Removed the blades and blade mount. Needed wheel puller and lnger bolt to remove the blade mount and then the drive pully. Remove all the baffels and such. Remove the belt and then start on the wheels and subsequent Truarch rings along wiht the various spacers and shimms. Take losts of pictures as you do it. Hard to remove the shift cable. Make sure you reinstall it properly or you wont be able to change speed settings. Fount the clutch able worn. Need to order another one. Wrapped it in SMALL copper wire and soldered the end for a temp. fix.Drive pully had a broken key and the crank keyway is broken so weleded the blade holder to the drive pully. Way above the basic weekend warrier abilities and skill. Still working on getting it all back together. Dont want to pull it all apart again to install a new clutch cable. Order both the shift cable and clutch cable if you plan on replacing the trans. Lots left out but this is a brief outline. Good luck. not an easy job.
Did you find this story helpful?
Thank you for voting!
  • 1