This is an authentic Makita replacement part which is sourced from the original manufacturer for use with air compressors. The special circuit breaker is used to prevent the motor from overloading from excess voltage. Over time it may become faulty or get damaged eventually requiring a replacement. This high-quality item is available as an individual component. Please make sure to check the appropriate diagrams for your model to ensure the proper repair procedure.
Removed old parts, installed new ones. The overload switch, first, remove four screws that hold the instrument panel to the frame. It\'s blue with gauges on top. Lay compressor on its back, remove four nuts. Remove compressor from frame. Unscrew air filter, set to side. Removed four allen screws that hold on plastic shield. Loosen nut tha
... Read moret holds overload switch. Make sure the two wires that are on it go to the same terminal on the new one. There is very small writing on the switch. Put it back together in reverse.
Read less
Did you find this story helpful?
Thank you for voting!
broken overload switch. the compressor has been running without cutting out for several full job days.
1 disconnected motor and cover from frame and air filter
2 disconnected the air line and pulled the motor out to replace the switch need 23mm box wrench
3 install switch and tighten retaining nut and install air filter
4 attach motor to frame
5 attach air line to motor
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
