The hammer case cover attaches to the bumper and to the hammer case. This item is made of plastic and is priced as an individual replacement part. This genuine item is supplied by the original equipment manufacturer for use with Makita impact drivers. A screwdriver and a set of pliers might be helpful during the installation of this part. It may become broken and will need to be replaced.
Troubleshooting
This part works with the following brands:
Makita
This part works with the following products:
Drill
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
Be the first to ask our experts a question about this part!
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Take off back cover. remove all screws, take a picture of the switch to make sure you have the correct wires going to the proper terminals. Remove old switch and install new one in reverse order. While I was in there I replace the worn F/R Change Lever. Also replace missing bumper and cracked hammer case cover, they just snap on.
Did you find this story helpful?
Thank you for voting!
The hammer case was broken and the hammer case complete had scratches and dents the ring spring was missed place and the bit sleeve was wobbly
I removed the bit sleeve with the washer, spring and the silver balls.
Loosened the hammer cover, removed the gear assembly, removed the anvil and before I decided to put everything together with the new parts I Re-greased the gears and the inside of the new hammer case complete. Than I went ahead and re assembled everything
... Read more.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
✖
Stock Status
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
✖
[{"position":0,"name":"Home","title":"Home","url":"/"},{"position":1,"name":"Cap or Lid","title":"Cap or Lid","url":"/parts/power-tool/drill/caps-and-lids/"},{"position":2,"name":"452837-5","title":"452837-5","url":""}]
