This genuine switch is made by original manufacturer. It is compatible with various Milwaukee handheld power tools. This variable switch controls speed. Please note that this piece is also available in an electronics assembly set. One (1) black plastic on-off switch is included in this order. Fwd/rev shuttle (direction switch) is sold separately.
I removed the screws and using a flat screwdriver I removed the cover of the tool exposing the switch and I replaced the trigger and then I put everything back in place and the screws and that\'s it.
1. Disassembled the impact.
2. desoldered the wires from their respective points.
3.unplugged the potentiometer to the switch.
4. Soldered the new wires from the switch back to the correct points. Heat shrink the terminals to isolate them.
5. Resembled and tested the impact.
1. Use a sercurity t10 torx to disassemble the entire gun
2. Cut out the two red wires and remove the old trigger
3. solder the new trigger to the wires you cut. (use heat shirk over the connections)
4. Put the gun back together
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP11877346
Manufacturer Part Number: 23-66-2653
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
